• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. vanaisa

    Rebuilding after 15 years of storage

    Well, army stuff. Whoever worked on that engine, took first set of pistons, he found. Thats why engine bored to max. Maybe he was carpenter or painter :D Big job but in the end you will be happy, i am sure.
  2. vanaisa

    Rebuilding after 15 years of storage

    --- he also showed us exactly what was not done well in the repair in 1989 and what constitutes part of the "damage" today. ---- what exactly?
  3. vanaisa

    M1009 won't start

    There are virus defenders for this. Yes, engune turns over, quickly too. But no start.
  4. vanaisa

    Starter switch wires

    second small wire should be for Neutral Safety Switch?
  5. vanaisa

    My (new) M1008...

    Oh, this is great. I sent few emails to our 4x4 shops and to Finland. If no results, i definitely buy yours. Just for fun - found pretty nice truck for sale in Lithuania...
  6. vanaisa

    My (new) M1008...

    yes, they are stuck and corroded. They sitting in diesel jar and waiting ultrasonic treatment (all separated to different plastic boxes).
  7. vanaisa

    My (new) M1008...

    ah, ebay of course, forgot this place. Thanks!
  8. vanaisa

    My (new) M1008...

    Well, descided to keep 24V system (changing winch to 12V is also pain) and upgrade to gear reduction. Maybe i am bad at searching but only place, i found 24V gear reduction starter, is Hillbilly Wizard. Are there other places?
  9. vanaisa

    CUCV Heaven, My build of a 1009 and 1008

    This should be water in fuel diode. In my 1008 it was burned. Removed it and put straight wire there. I dont remember, was WIF light worked before, but after diode removal light works as should - lights about half second when key in run position...
  10. vanaisa

    My (new) M1008...

    Yes, this "special solvent" is pricey. But as they use cleaner to clean large hydraulic parts from veneer line, i can "sneak in" my small injectors :) Starter trouble was dissapointing indeed. It went thru workshop month or so ago, everything was OK, they said. I check starter of course, i was...
  11. vanaisa

    My (new) M1008...

    Thanks! I definitely try that. Our company bought ultrasonic cleaner few weeks ago (large one). Can you advise, what solvent to use? It must be non flammable, i presume? About truck - put used injectors in, primed with electric pump, cranked 3..4 times and it runs! Well it ran some 5 seconds and...
  12. vanaisa

    Last (and only) cold start advance/high idle post/question

    Yes, this is cold start/hi idle sensor. In my 1008 wires were also cooked, hard and brittle. I changed wires, cleaned connector and sensor works again as should.
  13. vanaisa

    M1009 suppressor

    +1
  14. vanaisa

    M1009 suppressor

    Lam, i bought for my 1009 standard 100AH 850A (303x175x227mm) batteries. They both fit to rear battery holder, in this way i have more room under bonnet. No problems, last morning was -1C, car started like in summer.
  15. vanaisa

    Rebuilding after 15 years of storage

    I dont know, is it right one but sure it is pricey in Germany :) https://www.rockauto.com/en/moreinfo.php?pk=8892648&cc=1053021&pt=6256&jsn=472
  16. vanaisa

    My (new) M1008...

    One question more - i found replacement nozzles (Bosch and Delphi) - are there others, what fit to 6.2?
  17. vanaisa

    My (new) M1008...

    Hello again, was working and searching injectors. Got remanufactured ones, today removed two old and put new ones in. Old cyl 1 injector sure enough was rusted stuck and of course full of that wonderful goo... :evil:
  18. vanaisa

    What the Heck is Going On with this Speedometer???

    fuse 5 - 20amp Heater Fuse - Controls the heater. Also controls the GEN1 idiot light, 4x4 light and the Oil Pressure light
  19. vanaisa

    Rebuilding after 15 years of storage

    Bad luck, man. But before you take heads off, try fish those broken glowplug particles off with magnet. GP holes are small but if you take injector off?
  20. vanaisa

    Rebuilding after 15 years of storage

    I have also 13G glowpugs, but i have manual switch. 10 seconds and Blazer is running. Do you have original setup for glowplugs - i.e. 24V to resistor pack and from there 12V to GP relay? If so, then if one or more plugs are defective (yes, new plug can be defective too), voltage raises for other...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks