Search results

Time to replace the old trans and oil fill rubber hoses. What type of hose did you use for these hoses? Obviously it needs to be oil resistant.

Wow! What gear ratio are you running?

Put Helium in the tires and you'll pass every time :-o

Saw 90 huh? Wondered what those lights were in the sky... Now I know. Thought it was a drone :grin:

I you are interested in one of these, please consider the likely much higher tariffs coming in January.

I think these guys are saying "do your homework, just like we did.." It's ok not to know air brakes, but you need to study this stuff extensively BEFORE you go out on the main roads. I have a map of the air lines in my truck in a binder with lots of other reference materials. These trucks had...

Hello Felipe, Sorry for the very late reply. For some reason I am not getting alerts from SS. These campers are a foam / fiberglass composite. They are strong, but need to be carefully tied down to truck beds. Attached is a picture of the camper, to give you an idea of what we produce. Brit

I use both electric linear actuators and hydraulics. Recently I used two linear actuators to control the pivot of an attachment on a cherry picker. I would give the edge to hydraulics for versatility, lift power, and general ruggedness. That being said, you a American or Japanese linear motor...

I went pure hydraulic about 3 years ago. No issues. I carry the hand pump, but it is not connected. I use a Haldex electric hydraulic pump. Have extra one for back up AND can connect the manual pump if all else fails. Carry extra hydraulic fluid.

I will IM you.

Nice truck you have. These are custom made composite foam core / fiberglass bodies. See link under group buys.

Thank you. Very helpful!

What is the model # on this Delco?

On the site or FMTV portion? I'm interested.

That is helpful. My system has a heavy duty battery minder when not in use.

Yikes. Overpriced parts. Is the failure typically the coils or the regulator ? If it is the regulator, this stuff is just not very complicated, it could be replaced externally with a caps, regulating circuit. Are the internals large part discrete or surface mount ?

I want to understand the Neihoff issue more in-depth. Are replacement parts available for these units from the manufacturer? Anyone tear into one of their regulators yet to see if there are parts that could be replaced inside or are these potted in epoxy? Brushless style alternator produce much...

Can the acetone be run through fuel lines or is this just a clean and dump solution?

Extremely sticky. Used a pick to get it off the bowl. I am going to try a product from FuelOx.

Any issues with your former military truck crossing through Canada ?