Search results

Shout out to @belted_guns for a 3d print for the @Augi Vic-3 Bluetooth adaptor to properly mount and secure the box!

Bump, looking for a solution to connect up a baofeng to Vic-3

HID is just old - heavy electrical draw…. Less reliable. I also don’t have a need for the infrared which I’d like to replace with flashing lights.

Has anyone successfully modified the IBIS Tek HID light bars and convert them to LED? I was just curious if anyone had attempted or succeeded at this. Bypassing the ballasts and re-wiring would not be super difficult. I’m more concerned about finding LED’s that would fit with as little...

Any chance you have the lid file/design as well?! Came out perfectly!

I see most go for around 1500 in decent condition

UGH why don’t they sell with the armor. This makes me giddy (don’t answer this… I know WHY… I just don’t know why, ya know?)

I HAVE! Wouldn’t use anything else!

My dad had a puller but we didn’t have the clearance to use it. This looks more low profile. Might work. Hammers work for sure! Ha

I just dealt with this on my 1165. I first removed the belt, then took the bolt off the front of the pulley. Then the fun…. HAMMER turn, HAMMER turn, until she comes loose one millimeter at a time. I beat the crap out of my pully and when it finally came lose I washed it down, used a dremmel to...

The cooling loop goes to the oil cooling stack. The power steering gear , break booster, fan clutch, ps reservoir all loop to the cooling stack. There are 4 total connections to the cooler. I’m not sure if fluid flows freely to the other part of the cooling loop for transmission/transfer case...

See attached from TM. It is part of the transmission cooling loop. M1165A1 SN 258XXX

I’ve been trying to get at the root cause of air in my cooling / power steering loop and while replacing all of the hoses I came across the transmission cooling hard line is loose and wiggly and I’m not sure if this is normal and could possible my the true culprit. Check the video and let me...

Installed the tractor supply floor mat special throughout the truck! Cutting these mats down to size is a PIA but worth it!

I have the full kit brackets and all... just waiting for me to get the rest of my truck in order before putting it together!

Following. About to drop 300$ on hoses for this dumb fan set up. Would totally go with @Retiredwarhorses solution. Have an 1165a1

Would you mind sharing this cad file?

I’ve been out of power steering since I got the truck, air in the system. Going to start a hose replacement rampage because the system is so complex… power steering, break booster, fan clutch, transmission, rear diff and transfer case cooling are all connected on this truck…..what could go...

Last time this truck was clean, Bin Laden was still alive lol

Negative. Are you going to be cutting your own piece of insulation? I’m severing how to put it back. Once my heater goes up- no chance it’s ever coming down again.