Search results

Whipple supercharger is the way to go. I have an extra one in storage. There is also an Australian company that makes a supercharger with intercooler for 6.5. Also, there is a site sponsor who makes a turbo kit for HMMWV 6.2 and 6.5. Support site sponsors!

PHR six speed got a poor review from a guy on the hummer network. He is suing PHR.

Getting her ready for P400 swap. Engine is brand new

Subscribed

Respectfully, Eric’s post was pretty benign. Please consider restoring his post.

I’ve heard disaster stories. I wouldn’t do it for less that $2000/day plus $10,000 damage retainer in escrow and they pay insurance on policy YOU purchase. You need dozens of pictures prior to letting them have vehicle as proof of condition. Also you need to put tranny in LIMP mode.

Years ago, maybe 2019, a member replaced the heater box with aftermarket parts that were placed just behind the doghouse. Big heat exchanger and huge fans. Looked robust and warm as Heck. EDIT- I found the link… You should start from the OP first post...

Ok. Let me know what you think. I will be considering using sound AND heat.

Lizardskin sound and temp, or just sound?

Thank you

Let’s start from the foundation and work upwards… Is the filter new and clean or old and clogged? You only mention using the dipstick. Is the tranny full and topped off? You addressed this. Are you using Dextron III? Is your shifter properly aligned? Is your transfer case in H and your...

Frauhansen and I are recommending large caliber switches to cut ALL power coming from battery. Starter can require huge currents. A small gauge unit will create a fire.

Or a switch to a 400 Amp relay

Great work!

Use the water pump hole to better guide your reverse drill bit when removing the old broken bolt. Use liquid Teflon tape in the future.

Hoping to purchase at auction. Any idea if there are many more out there?

Flasher relay?

Respirator because CARC is cancer causing stuff.

There is a guy who makes a ladder bar to reinforce the low end of the short block. That and P400 heads and a forged crank and you should be great.

I own one of the last P400. Gonna plop into my Hummer.