Search results

Great info. Just ordered the parts and will be repairing. Let's see how it goes

Thanks

Any recomendation of a good seller/part? There are tons of options ranging from very cheap to expensive. I wouldn't like to buy a part that is going to leave me stranded.

Yeah, meant sooner than later.

One thing i noticed though, my left upper rubber boot for the half shaft is cracked. I guess i have to replace sooner than later. I have read on this forum that the way to go is replacing the whole assembly in lieu of replacing just the boot. Also, if i were to replace the half shaft how do i...

Well guys i am happy to report that no parts are damaged. Out of 8 tires i have only 2 are new and the other 2 are decent (not perfect). 1 blown and 3 with flat spots. So i am in the market for new tires, if anyone can point me in the right direction of a not so pricy supplier.. I have been...

I will try a couple of other tires I have on the trailer. Will try to figure out the issue and report back.

I am running Radials.

Yes, the TC is in H. The wiggle is coming from the front left tire. Starts jumping at about 25-30 mph and wiggling after that.

Something that got my attention also is that the gauge does not have red or warning zone , so I figured the temp was about normal however not 100% sure hence my question. I had to replace 1 tire that was new but flat in the front, probably this is the same issue. If everything else checks out...

Will fo that next. Thanks.

Yes, I am going to pull out the tire and also check the hub and spindle. I also see the tire wiggle a bit while on the way. On the temperature issue, I hope is the gauge as I don't smell over heating or hear crackling on the engine or anything unusual other than the gage reading.

Hey guys, I got a temp tag and was driving around the neighborhood and my temperature gage is rising to the 230 mark and then the hydraulic fan kicks in, drops To around 220 and so on. When I was around the block it never raised above 200, of course it was a couple of laps and not more than 20...

Installed a top today from Blue Ox Tops AkA William Welsh. Amazing and clean work, fits like a glove. Also installed the driver's side fire extinguisher 🧯

Here is mine. At first i thought about the mitsubishi eclipse '08 and up front seats but the cost, shipping and re making them in marine material will be non justified so i went with these.

Thanks guys, that leave me with the split tranny mount or something else

Action, check the video please. Is this movement showing a bad carrier bearing?

Tranny mount is split in half. Up for replacement. Thanks.

I am not sure is a GEP. It was rebuilt by melton in 2009

I guess i have to re check everything again. I have put like 20 miles around the block already.