Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I believe your issue will lie in where all have said above... inside the operator box, related to either the S8 or its accompanying wires. My gut tells me its the switch, just for the fact that the other settings work fine... I don't believe its the head. Good luck in the hunt.
I guesstimated based off Pemberton (your listed location). Either way, everything today either has had a squirrel orgy on it, or is gold plated. Good luck in the hunt.
Three about 4 hours from you:
https://www.facebook.com/marketplace/item/6474315202637850/
https://www.facebook.com/marketplace/item/608248138129424/
https://www.facebook.com/marketplace/item/644908557496516/
One about 3.5hrs away:
https://www.facebook.com/marketplace/item/1710973565994409...
I have some bolt down vibration dampening corner pads (think they were from an AC unit originally) that someone had mounted onto an 802 that I acquired last year... I might still have all 4 in my garage if you are interested.
Took a roadtrip through PA/NYS in the last few weeks and I saw both off road diesel available by pump (non agricultural location in the immediate area) and a different station with ethanol free unleaded. I think the unleaded was labeled 'rec fuel' from memory.
I would start with the Radio Shack clearance section that appears to be your operator cube where the missing relays are! :ROFLMAO: A lot of extra wires in there that appear to be taken from elsewhere and put there.
The relays and switches are readily sourceable through places like Mouser and...
Yeah those photos don't look bad at all... All the leads you see are disconnected from a single TB (genhead output) just behind the firewall near the air filter.
Look forward to more photos.
I just use a flat cut piece of 1/4" rodent mesh and ( 8 ) self tapping sheet metal screws and just go over the entire cutout with the machine lofted for easy bottom access.
I've recently begun using aluminized tape on the round battery holes under the trays, when machines sit without batteries...
Definitely make sure there isnt a second washer in there, and as Ray said... you may just need to anneal them. Only so many things could be causing this. You did confirm there are no hairline cracks in the injectors anywhere?
The primary mission of that cutout is to quickly evacuate water from the engine bay, under fording conditions. It will also allow for fresh air during use to pass through the system... but I believe there is sufficient cubic footage available solely through the side vents to keep everything...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!