• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 4XDesign

    Axle shafts too tight in housing.

    OK thank you I will check on the data plate to see what I find and I believe the washers can be removed.
  2. 4XDesign

    Receiver Hitch

    Here's a hitch I recently built for my m109. It's a friends design who passed away from cancer in June. I always want to give him credit for it.
  3. 4XDesign

    Axle shafts too tight in housing.

    The axle spacer marked U is the axle ring I was referencing earlier. There were two installed on the axle shafts, one thick one on inner and a thinner one at the spindle on stub shaft.
  4. 4XDesign

    Axle shafts too tight in housing.

    I am not sure if when I installed the spindle bushings they mushroomed slightly from driving them in which would make a extremely tight fit for the axle shaft?
  5. 4XDesign

    Axle shafts too tight in housing.

    Requested pictures This is how far the axle has been assembled. Also when you grab the axle shaft protruding out of the end of the spindle it is very tight. I have no play at all which I am used to having a slight bit of movement there. I had to put a three-quarter inch drive ratchet on...
  6. 4XDesign

    Axle shafts too tight in housing.

    Yes I'll get a picture of the other side of the retainer. According to my parts guy it is the one I need for the Spicer type joint. Also it appears as though the stub shaft going into the back of the spindle is where the issue appeared to be. Almost to like the stub shaft did not match the...
  7. 4XDesign

    Axle shafts too tight in housing.

    I have been working on rebuilding a front axle on one of my trucks. The truck has needed more work than any other truck I've ever owned... I replaced the bearings, the spindle bushings, as well as the inner seal retainers with seals already installed. When bolting the spindles back on to the...
  8. 4XDesign

    Denton NC Spring Rally 25-29 April 2018

    Just what I needed to know thanks. Sorry this was supposed to be a reply with a quote about the plug.
  9. 4XDesign

    Denton NC Spring Rally 25-29 April 2018

    I reserved a camping space for the weekend and I know it has 30 amp service. I'm just not sure of the plug. They claim it is a normal 3 prong I am just not sure if that is a normal "camper"plug or not. Has anyone used the power hook ups in the past? If so do you know what plug it requires...
  10. 4XDesign

    Denton 2018 Buy-Sell

    I need a driver and passenger window for a M35. Let me know if you have anything, more passenger windows needed if available. Thanks
  11. 4XDesign

    Denton 2018 Buy-Sell

    Hmmwv battery box/seat bottom. Maybe sides for two man hmmwv set up.
  12. 4XDesign

    Denton 2018 Buy-Sell

    I have LMTV bows with connecting poles. I believe it's a complete set, I don't have a tarp. $180.00 OBO will trade for lots of things.
  13. 4XDesign

    Denton 2018 Buy-Sell

    Do you have a price for the two trailers? Just curious? Tow bar?
  14. 4XDesign

    Denton 2018 Buy-Sell

    I have CTIS valves with hoses for FMTV wheels for $15 each.
  15. 4XDesign

    M105 axle assembly to accommodate dish-out combat wheels

    I just thought I'd throw a few pictures out that pertain to your post. M105 with 395's and a trailer with 105 axles with M939 spacing.
  16. 4XDesign

    Questions on putting 10lug 22.5 or 24.5 alcoas

    It can be done but adapters or spacers will most likely be needed. Here is my dual 46" set up on my flat bed. 3" of spacer to get the tires to not touch. Original bed mounts had to be removed. I also had to use a M35 front hanger set up to get the springs under the truck. When I bought this...
  17. 4XDesign

    New Project?

    Awesome! Looks pretty good
  18. 4XDesign

    Aircraft Tractor

    Since this thread popped back up here are a few pictures of the tug I was working on.
  19. 4XDesign

    Air Brake Info and Troubleshooting

    I worked on the truck for a while today. I used an air hose to air up truck and I pressed the brake pedal repeatedly, I actually got the leak to stop. After this it was pretty apparent it was the treadle valve, so I disassembled it in place and cleaned it. There was some grit in it, I used...
  20. 4XDesign

    Air Brake Info and Troubleshooting

    I replaced all three with new this morning. In doing so it did fix the leak at the emergency gladhand out front along with cleaning the one-way valve close to the gladhand. I will check out the flowcharts to see if that will lead me in the right direction.Whatever the culprit turns out to...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks