Search results

If Joe Biden can be voted into the highest office in the land, an Etch-A-Sketch website company can sell to the government. 2023, baby.

These folks are listed as one of the OEMs, along with Onan (so its probably whose actually making it). http://www.centroidproducts.com/ Their part number is C-A054F059

One available cheaper than anywhere else: https://www.ebay.com/itm/295471470827

I think this is a bad description... you might want to reach out to these folks: https://www.easternsurplus.net/PartDetails/10032/10-KW-Exhaust-Muffer-Generator-400HZ-MEP-813A Looks like the same Onan muffler for the 00X series, not an 813A.

There are a couple up: https://www.ebay.com/itm/294004090506

If your DC regulator tests bad, you can grab one here: https://www.eriksmilitarysurplus.com/vorebchforon.html or here: https://www.ebay.com/itm/223544362863

https://www.steelsoldiers.com/threads/mep-002a-and-mep-003a-dc-charging-system-test.94880/

Sorry I read it quick on my phone, I thought it was the battery gauge that was levelling back to zero.

Your gauge (and battery charging alternator) are working perfectly if it drops to zero. That means your batteries are charged and the system is maintained. If it was showing in the negative range, that means its discharging and running down your batteries

The 00x machines require periodic inspection of grounds for this very reason, which I am sure is why Ray mentioned it in a previous post. Glad you got it figured out.

If you don't have the TMs for this set, you can download them here: https://www.steelsoldiers.com/threads/all-the-tms-you-need-to-work-on-the-mep-002a.155935/

You need to test the DC charging system properly: https://www.steelsoldiers.com/threads/mep-002a-and-mep-003a-dc-charging-system-test.94880/post-2212133

Well you say the charging system works and reads 27V... where did you get that figure from?

Trace the circuit backwards, see where the voltage is changing. You have seen this gauge read correctly before, or this is a new machine to you? Is it hooked up correctly?

Have you removed and tested the diode? I would do this well before jumping it.

Spoons aren't rated to take a mans eye out either, but here we are in 2023.

Let us know. I might be able to lift some out of my parts stash.

They absolutely have a place in the toolbox.

WAGO makes a good connector. They are more convenient to me than wire nuts. Depending on the application though, I am more of a fan of those little heat shrink solder sleeve crimpless butt connectors. All you need is a good heat source (air gun, torch, etc) and you can have a properly soldered...

https://www.oreillyauto.com/detail/c/safety-stripe/belts---hoses/hoses/bulk-hose/bulk-fuel-hose--universal-/0a74c36f4425/gates-safety-stripe-fuel-hose/gats/27002