Search results

Ive been considering bending up some blanks of the door bottoms and rocker pannels to sell as patches... Would there be any takers on such items?

30 amps . . . Mounting is much easier due to the size of the unit. They work on a 4 wire system. You have 2 wires from the alternator which generate AC voltage , these are run to the inverter / regulator which has two more wires, trigger and output. trigger goes to a relay controled by the ign...

You can replace them with 5/16 X 3 inch bolts but will end up back in trouble with the hinges freezing up after a while. The above mentioned kit I carry was something I devised after being fed up with my own doors as well as many request from others to come up with a bushed design which would...

RE: Short Update yummmmmmm... sweet tea!!!! Anyone heard from Matt? *awaiting a emergency parts order* rofl

ultra? ... Your mean little NY... or little Cuba... ultra stops at about LA... (lower Alabama) rofl

Im a bad enough MV'er sometimes as is... My own personal guilt wouldn't allow a man whom has more than I do going on to do work on my truck when I am capable of doing it... but to lazy to get done!!! With that said... FINISH YOUR WRECKER!!! lol

Kubota uses a mag unit on their small (2-cyl) diesel engines (500-600 series) which prefect for installing on an application like this where you need DC power but don't need the power of a regular alternator (IE your not running a whole car). What makes it suited to this application is it size...

Ya could have broken a throw out finger or two off. When this happens first they will not disenguage then as they totally give way they don't enguage at all. Pull your inspection cover and look for metal parts. Even still its very difficult to actually "see" broken fingers with out taking the...

Im sure your CUCV would also do it!!!

Call Matt in Live Oak... Im sure he has one... 954-812-5989

Well I've been asked several times what is going on with my truck so here is the low down... I installed my remote filter kit some months ago and put about 1000 miles on the set up before parking the truck with some other issues... Im quite happy with the kit and the pressure times so not much...

Vence... There are a few ways to go with what you want to do.. When I wired Chucks 710 I basicly made the ign switch control both the 12V supply and the power going to the transformer... This keeps the system working like a normal charging system should and turns the accessories on and off with...

Clint thanks for allowing ODI to sponsor this event... Guys if you have never put on such a shing-ding you really have to experiance it to understand how much work it is.. Clint deserves a lot of credit and hats off for stepping up to the plate to put all of this together. Its great to see so...

Kenny.... Convoy???? I just booked a double camp site... Pretty good deal, they fit two fourty foot vehicles with power and water at the site... There are 8 left at 44$ a night...

You need the "cross length" of the joint WITH OUT the caps installed and the cap OD... 2520-00-045-7425 (PN 5703335) ... I don't have this available but if you get the measurements I can get you a Napa cross for it. The question then becomes do you want a cheap'o import PN or a US made joint...

"Purple Power" from most auto parts stores, let it soak (dont let it dry) and hit them with a PSI washer...

Need I come slap you??? LOL

Bjorn, Shoot me the mil and NSN I prolly have those avaliable to me... No you cant just change the caps, its like installing a new wheel bearing on the old cone...

RDD can you email me more detailed pics of your truck both with and with out the clutches installed. . . I would like a closer look at your bellhousing and flywheel. Send them to mikeatodiron.com

Correct me if I am wrong here but. . . The windshield looks like the artic shield conversion not a memphis cut up. DR had one of these and I considered installing one on mine before I decided to do the custom route. His name is escaping me at the moment but the surplus dealer in KY whom...