Search results

Noico 80 mm. Thick. Cheaper than Dynamat. Easy to install. Takes the tin can sound out and gives you a thud instead.

Hi Guys! I need to clean out the cab lift hydraulic lines and check valves on my m1088. I assume the check valves are in the manifold? What is the best method to do this? Do you flush with anything in particular? Push air through the lines? Add a little alcohol? Are the little filters in the...

I see the blue spring of death.

What brand cameras did you use? I like your mod :)

3116 or 3126 engine? Did is sputter or just die? FYI CAT dealer in Antioch.

I think the steering wheel would be a nice place to upgrade the interior. Anyone do this yet?

Thanks for the exceptionally thorough reply.

Ah, ok so I think I do understand your explanation. So is the tire that has the least traction detected and the power flows to the grippiest tire assuming it is in MODE, or is this not the case, and power flows to the tire with no traction, and thus the reason people want the Detroit style...

I think the some of the confusion stems in part from the use of the terms "locked" and "locker". Maybe someone could draw a simple stick diagram to help ?

Oops, thought I was somewhere else. My apologies.

Can we get a Emergency / dead on the side of the road perm. section for the major sections of this site? Maybe call it BEACON or something. Would be great if the header would flash like a beacon when someone is stranded. Then our attention as members can be quickly drawn to the people that...

Sometimes it is best to accidently swap LOCTITE for lipstick!!:mrgreen:

Should I assume that any axle that has a non-actuated locker is locked up all the time? If this is the case, would not scrubbing occur with that axle is engaged or not? Maybe I am wrong. I did some research on Meritor's site. It would seem that they divide their power 50/50 to the rear axles...

yes

I was thinking about how quickly the air tanks run out of air with repeated braking. While I have never driven in ice or snow in my truck, might a larger tank allow you to pump the brakes a lot more before no air (assuming no antilock brakes) and thus be safer? Maybe I'm missing something.:)

What CAD/CAM software are you using?

Based on the suggested reading, it appears that all 4 wheels are driven "In a 6x4 truck, both axles are driven at all times. The only thing the power divider/interaxle differential lock does is lock the outputs to each axle so that they always rotate at the same speed. If a wheel slips on one...

Interesting article https://www.tradetrucks.com.au/product-news/1510/gaining-traction-power-dividers-versus-diff-locks

Ummm...based on the videos i see on the M1088, the tree loses LOL

So for a vehicle that is driven a lot on the highway, a locker in the rear is likely the best because the rear only locks when it is activated by operating in MODE? And there would be reduced tire wear? We need more snow videos of 5 ton trucks to look at what it does when it slips : )