Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Pretty sure you just upload it as an image file (little picture frame above when you reply).
You will be held in the highest esteem if you do.
There outta be a site somewhere you can find/download instructions like those.
Thanks in advance.
Norm
THAT was the article I saw and couldn't find again.
Same part # as original. This WAS updated, there are several different mfrs with different numbers. I'm finding quite a few sellers on ePay that are pushing Chinese stuff - I don't want.
Question is, is there a part number assigned to the...
Have same problem with my RT side wiper pivot.
Dug around on the web yesterday a bit and find there's an UPDATED part, with the shaft peened/driven into the wiper arm end so it's less likely to come loose.
What I'm at a loss for is to figure out which part number this is.
A reading from the...
(edited. Sorry.)
You really need to mark it up to match YOUR truck.
Decide how wide you want it (PS says 40", but 41-42+, doesn't matter.
Cut board (I got a 23/32 - 0.72" - 2x4 sheet at Home Despot for $15), then lay it on the airlift loop tower and body just forward of the windshield frame...
This. Cutout yesterday, painted last night, cut out stencil last night, painted this AM.
Wife says "why?"
Well, it's like the one here in the PS magazine cartoon. Did I really need the lettering? Well, it's on the drawing.
Obsessions. I'd never question her devotion to her pets. Or the...
It's in the manuals. First aid kit, mostly, but you can easily fit a 35 amp SLA battery in there for a dual voltage generator sytem, plus some room for other stuff.
Drove around with my daughter the other day. She noticed the padding/sound proofing I'd installed made the truck about HALF as loud.
I own a dB meter, should've done before and after. Oh well.
Then we hit an open stretch of road and I ran it up to 55. Still quieter, but "shouting over"...
Welcome to the madness.
Nomenclature is important. Download the manuals and print them at Kinko's or your work laser printer - they're several thousand pages that make great bedtime reading. There WILL be a test. ;-)
Safety wired a couple of 3/16" linch pins to the pioneer tool rack. I saw somewhere on Juan Prado's build that he had used different pins, so I ordered a set of these from amazon. Think they were about $4 and change delivered. Could've waited until I was in a tractor supply store, but just...
That's how I drove mine home from the seller's lot: 42 miles of Beltway/interstate, passed two Maryland State Police cars (off to the side ticketing someone) en route. No plates, not registered to me, just a bill of sale. Son in his car behind me every inch of the way as sort of a "shield"...
So sorry. But it's an easy enough thing to replace/repair. Shop around, they can be had for under $500, you can buy rebuild kits for much less than that.
Sounds like you're in neutral. If you're turning the shifter by hand, you should get four distinct notches which you do.
They are: HL - H - N - L. "N" being second from the rear. THAT's on the INDICATOR as well on the TC.
The order on the TC is reversed from what you SEE on the...
Your choice here:
http://www.hummerpartsguy.com/search.asp?keyword=6003519&search=
Also sells new seals. Instructions are around here somewhere, you need a LOT of a good quality windshield installer's lube and patience.
Before the moderators shut down this thread (see "Da Rulz"), my truck was titled in MT when I bought it, no exceptions regarding on/off-road. Local seller and SS member "decodeme2" (now deceased :sad:), I have NO idea how this was done from Maryland on a truck that came out of North Carolina...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!