Search results

That was cool... Simple to read and understand. Basically what i took from it in short is the Dot 5 silicone that repels moisture is mostly due to the storage of the vehicles.

Oh, I didn't know that.. see good question gets a good answer. Thanks..

I know originally the gov used DOT 5.Depending on the amount the owner drives it why dosent he just flush it (since he has to anyways) and replace with 100% DOT 3? He HAS to do a flush. He might as well save about $80 and do it with DOT 3 unless anyone can think of a reason to stay with DOT 5...

I made a forum mistake by forwarding the link to that Ebay posting for 6 wheel cylinders. If you want to PM me and i will pass it on. It's not my listing, just a good deal.

I wish i found your ebay store back in march... oh well. I have you saved to my favorite sellers for future. Discounts help sooooooo much. I appreciate it.

Even tho I dont have a 5t, I still want to meet up sometime.

There was no way i could have made it tonight to foxboro tonight. I wanted to, just couldnt. We should still connect tho

I think the only way would be to pull the injectors and actually take a good look at them for a hole. I doubt it's the problem. Check what Dieselbob said.

Sounds like a load equalizer problem. i am sure there is a simple fix for it on here. Good luck my friend. :doghead: :doghead: :doghead: Ha Ha ... you just got tippled.

actually i have a huge pile of dirt next to my house. i dont think the developer would want me on his property since i just put the skill saw to a entire pallet of trex decking he had 6'-8' over my property line... check out the pics of the before and afters... i used his own stakes to string...

sure.... if we can figure out how to get it in the back :doghead: . How can we rig the winch to lift a liftgate big enough? AND can we do it by thursday? (BTW, where are you out of?)

I would love to go to BPS but still dont know if i can. I just got the wheel cylinder replaced and 2 sets of axle seals done. Front diff was bone dry.... took 1/2 gallon and the other diffs took a quart each. I am sure it will make the trip just fine but still haven't traveled that far with it...

Inside the 3 lever switch is a self resetting circuit breaker. I did a write upon it in another thread. I believe it's a 20 amp . I bought mine at autozone for like 3 bucks. If that fues blows, you won't have any dash lights or headlights or blinkers. If any of those are working you have a...

fuel cut of rod... i dont know what the rest of what you said means... lol

When i reused mine it was cut about 3-1 when my crank case flooded. But i have also been known to pour brand new 80w hydraulic oil directly into the tank to without any problems. Also I had a misc O-ring kit for years that i bought a a True Value hardware store. One of the o rings seemed to...

Glad it worked out for you! Just remember that the savings get even better when you burn the used stuff for fuel. Have a Great Day!

I removed the 53's of axle 2 and 3 so i could swap out my wheel cylinders. However it was not the problem. New axle seals were needed and the brake drums needed a good cleaning (they were covered in clay). Axle 3 had to stay apart as i had to wait for a wheel stud via mail. continued to...

Is your ETG installed before or after the turbo? I don't have any advice about the mileage but i will be curious to read along.

.

In case the others uploads were to small ;)