Search results

Check the linkage and make sure it is actually in the correct shift position.

We have a M114 project we are working on and are trying to get the front torsion bars pulled out. These are proving to be very difficult and we cannot get them to move, even with heat. Just wondering if anyone else has experience with M114's? Thanks

Probably your least expensive option is find something either British or Russian built. You can still occasionally come across M113 or M114's, but parts are hard to come by and they can get expensive to rebuild.

I wouldn't call it restoring, but more of a refreshing. We are putting a new drive pack in with a high horsepower GM 350 engine, new transmission and new crossdrive and then repainting it. Thanks for the replies

Any idea what the original paint color that was used on the M114's in the 60's and early 70's? Thanks

I am working on a M114 project and we have the TM 9-2320-224-25P which is the general parts manual, but need more info on the transmission which is a model GM (Detroit) 305MC. The parts TM for this transmission shows it as TM 9-2520-245-35P. I am specifically looking for either this manual or...

It is a Holley carb. NSN is 2910-00-736-3596, part number 3823489

I have a like new, very low hour unit MEP-816B. This has the CIM display. I am getting a fault code and it will not stay running. Any ideas how to access the fault codes on these? Thanks

The military must have had some way to distribute this power to a shelter. Here are a couple of pics of what I am talking about. My shelter has ports on it to plug in power. I am trying to figure out how to get from the wired connectors on my generator as mentioned the L1, L2, L3, L0 to the...

A M114 might be another option, we have two of these right now with tons of parts. However the parts are hard to fine.

The 3116 had a 330HP specialty rating at 860 torque, but that is about has high as it ever went.

You will get close to 70 MPH with the high speed gears, we have done several of them.

I have a nice MEP802A that will be trailer mounted for portable power. The manuals are kind of vague on power distribution and connections. I see there are military power distribution boxes available and various cables. I am trying to get a picture of how one of these would be wired up and to...

Has anyone hooked up a M934A2 to shore power, military generator? I see there are the external connectors, just trying to figure out how to wire to a military generator. Thanks

Has anyone done a keyed ignition in your LMTV? I have seen these before and just wondering what ignition switch to use. Thanks

Does anyone have information on the S-788 Shelter for the HMMWV? I am looking to find out how to get auxillary power to the unit, how it hooks up to the HMMWV, etc.? Thanks

Any idea what parts would be vulnerable to an EMP on a M939 series A2 truck? Thanks

I do not believe the HEMTT wheels will bolt, they are different. I do not know of any of the MTV's currently being sold at auction that would have A/C. You can add it though with the proper interior HVAC control box, condensor, A/C dryer and A/C compressor, but will take some custom mounting...

The Series 60 is probably one of the best engines Detroit ever made outside of the current DD15. They started building them in the late 80's and there are plenty of parts out there for them. They do not meet current emissions though and therefore CA is off limits. They are very popular in...

Welcome from Iowa, and yes they are addicting