Search results

This is my truck placard. I'm wondering if there is any way to find out what the truck was specifically used for and when. Or if that is even possible.

Normally I would't pull it out, but I have to gain better access to the front of the IP. I can't fit a small pulley puller in their with the rad in the way. So i guess she's gonna get a rad flush also.

I'll have to find some. not sure where to even start to look.

TM-9-2920-225-34 - Page 15 of 262TM-9-2920-225-34 - Page 15 of 262

I dont know if this helps, but I found this for you. I think from reading it that the 3002AD, and 3002AE are very similar, if not the same. 1-12.DIFFERENCES BETWEEN MODELS . Refer to table 1-4 for differences between generator models covered in this manual. 1-13. DESCRIPTION AND DATA. a. Basic...

Well I have decided to pull the radiator off this friday in attempts to reset the timing on the IP. Wish me luck, and any advice to make things go easier or quicker would be greatly appreciated.. Im afraid I may have to replace the radiator hoses after I remove them. I guess i'll find out after...

I almost forgot, I did find a original military ladder that would have come with the truck to get in and out of the back of the van. So i guess it wasn't a complete waste of a day.:lol:

So a quick and painful update. The good news is I figured out why my oil filter canisters were leaking after the recent oil change. Come to find out I didnt pay close enough attention to what gaskets I put on out of the Napa oil filter box. Thankfully I still had the bigger ones. After install...

EXCELLENT! She looks wonderful. Ive only had one for about three months. Minor issues here nd there, but never the less, still fun.

I lined up the timing marks on both engines before either IP was removed. How would i know if it's 180 off? It is hard to start as well.

Thats excellent! Ive had mine since october, and finally got her running after about 30 plus years of sleeping. Couldn't get fuel to the injectors. Found out the IP was frozen. Replaced it and she fired right up. Now its a sputtering issue. I cant get her above 20 or soo.

How is it running? Im still having a hard time getting mine to quit sputtering.

That's killer! Great find!

Used it to pick up a 2 ton gantry from a local metal shop that didn't need it. The gantry will be used in general maintenance of truck but also when I pull the bed to strip and paint the frame thi s summer That's awesome! Good for you!

I wonder if maybe my timing is off just slight enough to cause the sputter and lack of power. It's really hard to get started, but when she runs, she purrs like a kitten. Only sputters when I rev the motor upwards to around 1500 to 1800 rpm. Then it stops sputtering.

Was the "tap" something aftermarket? I don't think mine has that. Unless i misunderstood you.

This is my first mv. Its all new to me. I do hope it stops sputtering and i can drive over 20mph.

Yea that may be it.

I also literally have only driven her once.