• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    Batteryminder OR Solargizer?

    but a solarziger will not help a weak or dead battery htey will just keep good ones fresh. If yo uhave access to power go with the battery minder you will not be sorry. And it might help bring the batteries back to life a little bit.
  2. S

    Looking at buying my first deuce is this a good deal?

    The newer trucks are more work to maintain then the older M35A2. The older truck is much simpler. THe difference really comes down to what you plan to do with it. They all have differnet uses.
  3. S

    Towing a 12 volt trailer with the deuce - please help.

    amazon has a voltage converter that will take 24 volts to 12 volts. They are relatively cheap and you don't have to go through 120 volts.
  4. S

    Towing a 12 volt trailer with the deuce - please help.

    That is just how I would do it.
  5. S

    Towing a 12 volt trailer with the deuce - please help.

    I should make a few of these boxes up for 12 volts. IT isn't that hard. You will need the NATO plug that connects any military trailer. You will need 3- 24 volt relays. You will need a 7 pole RV box or 4 pole flat plug. You will need a sealable water tight electrical box. you will need a 24...
  6. S

    MEP-005A high voltage problem.

    I only have the one so i can't swap parts that would help out quite a bit indeed
  7. S

    MEP-005A high voltage problem.

    HEy I found the TM thanks for the info. Now I have to get some tools for the 208VAC and 95VAC
  8. S

    MEP-005A high voltage problem.

    Iwill have to go through the TM again. I couldn't find itI have the -12 is it in there? IF so can you tell me where?
  9. S

    MEP005 under voltage problem

    On mine when i first got it I had some issues with the fuel system that i got cleared up but when i finally got it running it would make more then 100 volts. I couldn't adjust the voltage with the control. It didn't matter where i turned the control. When i flashed the fields I would get...
  10. S

    MEP-005A high voltage problem.

    I am still having under voltage issues with mine. Flying dude did you get your generator working?
  11. S

    MEP-005a voltage regulator repair diodes

    Ok that still didn't fix the problem. Same issues as before only 100 volts and no ability to adjust it.
  12. S

    potting materials

    After I repaired a voltage regulator I had to remove a bit of potting materials. I have seen other people make repairs. does anyone replace the potting materials? If so what to use and where to get it.
  13. S

    MEP-005a voltage regulator repair diodes

    Ok the answer is N4246 but an N4004 can be used. you need a 400 volt 1 amp diode.
  14. S

    MEP-005A high voltage problem.

    This is the thread I was looking for
  15. S

    MEP-005a voltage regulator repair diodes

    My MEP-005a is only making around 100 volts. The voltage control doesn't function. Previously it worked. So reading around it seems like the diodes in the voltage regulator are bad. Removing the board, the diodes on the voltage regulator look swollen and corroded. I removed the gel...
  16. S

    Looking at buying my first deuce is this a good deal?

    I also have a winch truck in Pa for $6000. But I thought the point of this thread was asking is something was a good deal. Not a wanted ad?
  17. S

    Looking at buying my first deuce is this a good deal?

    w/w means with winch. It is on the data plate. The bottom line is the picture he sent you is not the truck that is for sale unless he is going to do alot of modifications to it. They mostly all look alike but that isn't the truck you described.
  18. S

    Looking at buying my first deuce is this a good deal?

    Those wheels are A3 wheels also which are designed for an MPT tire. Not going into detail here but a different bead then the tire. Like a 16 and a 16.5 tire.
  19. S

    Looking at buying my first deuce is this a good deal?

    What wheels are the tires mounted on? How are the tires? are cracks or dry rot? Are they the stock wheels where the tires are ballooned outward or custom wheels that are the propper width for the tires? air assist is nice. and a winch is nice. Does it have a clean title? what shape is the...
  20. S

    New Jersey April 26 and 27th, 2014 Military Vehicle Show and Swap Meet.

    Last year was my first time to the show. It was a great show and i liked the huey helicopter that showed up. The national guard was there as well so there was a lot of great stuff to see and I am looking forward to a great show this year. I am looking for parts for an M35A3 winch setup if...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks