Search results

I would have to go with cosmic FUBAR myself or perhaps a Charlie Foxtrot.

I bet bigelk50 left the grub behind when he was liberating the latte cup holders from my truck.;-);-);-);-)

That is a bummer that someone absconded with your mud flaps. I was hoping to find some goodies in the toolbox of my M35A2C, but it was empty. The only thing I found was a half eaten Sarah Lee cookie, 2 bottles of Propel and an empty burrito wrapper. BTW - I used to have 20 acres out of Darby...

Hey Reub - That is cool. Can you provide more info on the "NW Edition Package" latte holder you have pictured above? Is that the one that came out of my truck?:-D:-D:-D Thanks for sharing the pic!!!!!

Those are some fine looking rigs!!! Congrats!!!!

I will get some close ups of the NW Edition M35A2C, but it wont be until this weekend. The silicon was part of the optional "NW Edition package" to keep the inside of the cab dry due to the above average rainfall we recieve in this area. I don't know what happened to the latte cup holders, but I...

Welcome rivired!!! FWIW - I like the C turbo myself, but I would drive both trucks and see which one runs down the road the best, if you have not already. Also, what is the condition of the sheet metal/paint on both trucks? IMHO the one with the least amount of rust would win if all the other...

Thanks for all the replies. I have one of the decal removing tools, so I will try that first. If that does not cut it, I will try the gasoline or gasket remover method.

I just picked up a M35A2C and there is silicon sealant on the joints between the hardtop and the cab over the CARC. What is the best way to remove the silicon sealant? The rear cab window is also stuck closed because they applied silicon sealant around it too. Thank you!

That sir, is a work of art! Well done!!!

Mr. Carnac - Can you provide the year of manufacture and a brief service history for my newly aquired M35A2C I picked up from Ft. Lewis? Serial # 0940 10959 Thank you!

The truck and trailer look great! What are your plans for the trailer? Congrats!!

When it requires more than duct tape or bailing wire its a project.

I don't have the paperwork in front of me, but it was approx $3800. Then by the time you add in the GL and Governor's cuts it was right at $4500:roll::roll::roll:

Congrats on your aquisition! Where are the pics???nopics

Thanks positive feedback on the new truck gentlemen!

The brakes worked great. The M/C was full, but I think the brakes need to be adjusted or the shoes replaced. It will lock the wheels on pavement, but the brakes get applied until the pedal is about 1.5" from the floor board. I am going to go through the whole brake system while I am waiting...

Here is a pic of the (2) trucks together. Do you think if I leave them alone long enough I might find a 3rd deuce in the yard some morning?

I picked up my new M35A2C today. Once I got through security and got signed in with the GL folks I started topping off all the fluids as required and then one of the fine gents from the GL staff brought another M35 over to give my new truck a jump start. I brought a set of 6TL batteries from...

Godspeed and thank you for your service!