Search results

May I ask why you are taking them off?

It sure was screaming deal IMHO.

Added picture...

Added picture..

Well I tried to purchase the M756A2 that wsucougarx was going to purchase, but someone else beat me to it. BTW - I checked with him before I contacted the seller. It would have been a nice truck to restore. I hope the guy the bought it appreciates it. I was playing email and phone tag with the...

I recently purchased a M103A3, but it is missing the (2) formed channels that run fore and aft and support the gen set. Does anyone know where I can get the channels or where I can find the dimensions so I can fab my own? I will upload a picture later, since right now this feature does not seem...

Mine is on the left mudguard too.

If I were going to buy another M35 I would want the following: Airshift transfercase Dropside bed Front winch Hardtop Personel heater Cold weather start (either bottle) FWIW - I have had my M35A2 for almost (4) years and I have never had a problem with her. She always starts and has hauled...

I would install a set of locking hubs on the front axle if it were my truck.2cents

I have had a set of jatonka's spin oil filter adapters for over a year and they are a quality product. I really like the fact that the oil pressure comes up in 5 - 7 seconds during a cold start versus ~15 seconds with the OEM canister filter setup.2cents

Loco_Hosa - You can legally drive a deuce with a class C license in Washington State, since the GVW is less than 26k lbs.

Thanks for posting a front shot of your trailer. Chris

Bought a M103A3, AN/MJQ-16 this past Saturday and towed it home from Beaverton, Oregon. I towed the trailer the 160 mile return trip with my 3/4 W250 Cummins and the trailer towed like a dream. I have attached a pic of the trailer and I wondered if it was common to have the panel welded to the...

The site looks great magnus580...You done good sir!

Yesterday I picked up a M103A3 for my MEP-002A. My thanks to papercu for the trailer guidance.

Wow! Nice looking rig you got there!

-Spin on oil filters -Spin on primary fuel filter -Front locking hubs -Remote resevoir for the brake master cylinder.

-Finish intalling new west coast mirror kit. -Replace screws that the heads twisted off of while removing the door hinges so I could remove the door hinge pins that have been in there for 43 years aua -Order NOS door hinges from Saturn Surplus. -Change engine oil and filters. -Change oil in...

I posted this question on another forum for generators and a gentlemen mentioned that I should be able to get the part from my local Cummins/Onan dealer. The MEP-002A shares some parts with the civilain DJ series Onan generators. Anyway I dropped by Cummins/NW and they had the part on the...

Well my Napa parts house was useless, but I think McMaster-Carr may have what I am looking for. I need to take a few measurements to verify and I will post the P/N of what I order, if it works. Thanks again gents.