Search results

Thanks Bill, but that is way to pricy for a wheel nut socket which are typically in the 18 to 24 dollar range. Bruce

I measured the axle nut flat to flat as 3 3/8 inch. However I could only find a socket size of 3 1/2 inch. Will this work, or is there a 3 3/8 inch socket out there some place? Any help would be appreciated, Bruce

Throttle stop lock I took a piece of 1/8" x1" aluminum flat I had laying around and cut off a couple of inches. Then I bent it around the shaft of the throttle stop in the form of a "U" so that I could slip it onto the shaft easily. IE to prevent it from being pushed in. Then I drilled a hole...

Now you have a guardian angel who will always look out for you as you did her. Bruce

Thank you very much, Now I can cut the tube I just bought. Bruce

Can some one tell me the length of the tube in the standard issue torque Multiplier kit. used for lug nut removal/replacement. Thanks, Bruce

If anyone is coming from Whittier to the bay Area, I could use some help transporting a 5 ton cargo cover to Berkeley. Thanks, Bruce

Alpha Heaven I've bought a lot of M211 parts from them. Realy nice folks and always wonderful stuff. Bruce

Fuel Pump *Correction* I had a bad link and thought Alpha Heaven had went away. Check with them and see if they still sell the inline pumps. I have one and they work well. Bruce

Computer DumDum Award Thanks, I had a bad URL marked which I thought was AlphaHeaven Duh. Sorry for the noise. Bruce

Does anyone know what happened to Alpha Heaven or Roger? The street address comes up as surplus outlet but only for the later model trucks. None of the M211's etc. I am wondering what happened to the old inventory. Bruce

Fuel pump Alpha Heaven used to sell an inline pump. I have one and it works perfectly, But Alpha Heaven seems to have dissapeared. Any one know what happened to them and Roger? Bruce

I have a bad leak in one of the fuel lines coming off the fuel filter. It is the short straight piece, not the bent piece. The TM calls it out as being preformed, but it looks like what is there is just some typical hose. Since it failed dramaticaly, I would like to replace it with something...

I just put Striker singles on my M211/M108 Hybrid that I rescued from the crusher. I had to mount them as the outside position of duals since otherwise they would hit on part of the frame. Will this put excessive stress on the axle assemblies? Although this truck will be used for light...

ISO containers are used for both cargo and shelters. The contract for the connectors that allow you to connect the containers together solidly was given to Tandemloc. The paticular connector I am talking about was field tested by the Marine Corps back in the 60's, so I suspect that the...

Thanks EO2NMCB, I had the wrong search argument. Bruce

Thanks Tony! Bruce

I misjudged slightly and cracked the lense on the passenger side marker light. Does any one have for sale or know the GM part number? I searched the 20P and 34P but no luck. Also does anyone have the door seal rubber or know who to Get it from? Thanks, Bruce

Does anyone know anything about this request I got from the MVPA about their hiring some outside firm to make a directory using our personal information. Bruce Here is a snipit of the email: Work has begun on your 2010 Military Vehicle Preservation Association Membership Directory, an...

I sent you an email Eric. Bruce MVPA 23824