Search results

That truck was on GSA the other day. I have to pick up a M1009 from there. When are you going up for it?

Is there any truth to the rumor that all the M35's have to be turned in by the end of the year? Does this mean that the M35's will dry up on GL?

My list for a pickup and towing a duece Cardboard to lay on Rags Hand cleaner PB Blasters fuel cans wire cutters Vise grips Jack Tire tools Distilled water Your GL invoice Brake fluid batteries Engine oil Antifreeze belts for alternator and compressor Air hose with a removable chuck Air Gauge...

I don't have any but there are a few winches for sale on GL now with the level winder and the tensioners. They are in Ohio, I won't post links as to not offend the SS gods. YOu propbably are not looking for an entire winch but you mihgt be able to get one cheaper. just an idea

what all does the truck have on it? Winch yes or no hard top or soft top heater air shift transfer case As for plates if you don't need to use it for an every day driver then your can get antique plates. I don't know about ohio, but in pa the plates are $75 and insurance is cheap about 200...

I just bought a set of slave cables from ebay for $55. there was $20 shipping so the total cost was $75. They are not new but there are no cuts on them and the copper has years worth of electrons left.

Too bad it is not a duece engine you are working on. I could sell you a good running LD-465-1C for $500. But you need an LDS not an LD engine.

those trucks brought alot more then what I had thought they would have brought.

Is that the one for the trailer and rear lights?

I have some parts left on a duece tht is going soon as well let em know if you guys are interested in any of this stuff before it goes. engine transmission 1 rear axle transfer case to rear driveshaft cab box passenger fender bumper steering column steering box tool box door battery...

I don't know if I can make it or not, but if you guys need a hand I am like 25 miles from tremont. So if you need something let me know.

did you get your EUC?

I have a good air shift in Pa for 300. But you would have to pick up. I really don't know how I would ship it.

i have a good running engine for sale that you could hear run as well.

Rule #2 Weight in the box Rule #3 make sure you are in 6x6 before you start pulling.

it might be for a 5ton. What did you have to pay for it?

The space between the fenders is 81.5 inches from what i have read that is like 6 3/4 feet. There is no way a duece is that narrow. I don't have a chance to go and measure mine right now but i am sure that it is over 8 feet wide. but hey that is just my view i could be wrong.

I think you wll find that the width between the fenders is not large enough. Unless you can drive over the fenders it will not fit on it. you will be about 10 inches or so too small to fit. you really need a deckover for this.

If you are interested I have a etra spring seat that is in nice shape. The cover is in nice shape and it is not weathered. Pm me if you are interested in it.

Got one all the way over in PA