Search results

Yes I searched and read many of the threads about the 7004R but there's a few questions where there's conflicting information. I really don't want to do a 4l80E and I don't want to modify the driveshafts. TH400 In the HMMWV what is the output shaft spline count on the TH400? 765R4 Does the...

Thanks! I’m assuming it’s the same hardware in the center. It’s easier to find polyurethane bushings labeled for H1.

Do the HMMWV and H1 use the same control arm bushings? Did the bushing size change over the years?

HMMWV it’s serial is 508xxx

How did you do that exactly? The gauges I have are grounded through their bezel/foundation clip on the rear and if I swap them I think it would send positive to the ground of the other gauges.

Where can I find exploded parts diagrams for various components on the HMMWV? I’m specifically looking for the rear suspension A arm/control arm bushings. Does the civilian H1 use the same control arms and bushings? And I need ball joints however I’m seeing parts that claim they’re used until...

I just purchased this vehicle last week with a broken fuel gauge. The previous owner said that he had replaced both the gauge itself and the sending unit. He said that he determined there must be a broken wire somewhere but couldn’t diagnose where. I cleaned the ground connections behind the...

I have this type seat pictured below. I would like to convert it to a slider style. That’s where I need help. I’ve seen sliders for the H1 but they’re about 13” or so distance from hole to hole and need to be on the same plane, clearly this lower seat bracket is not on one plane. I’m 100%...