Search results

That makes it a little bit more difficult because ideally you need to have a load on all three legs

Is your house and shop fed separately?

The way these are tapped you have three outputs l1 l2 l3 each one of them is 120 volts to l0 and in between each one of them l1 l2 l3 would be 208 volt

With those voltages I would guess that you are wye tapped in your service and it wouldn't surprise me if you could adjust the generator up to put out 125 and 219. Or close enough. What you do want to do is make sure you have all three outputs loaded somewhat the last thing you want to do is...

Most 220 devices are tolerant of 208. You could split them up

Tell me about your shops it might be better to split the load

Okay, simple math is that things going to put out about 250 amps and in order to prevent it from wet stacking you're going to have to load it to somewhere around 200 amps. Not to mention it's going to pull about 2 gallons an hour. I think you're looking at some massive Overkill (and this is...

That being said that's a very big generator How big of a load do you need to drive especially single phase and what's your intended use for this cuz it's going to suck fuel like it's going out of style

It should be a 12 lead head so physically it's possible the gotcha is how the other control systems are tapped into the reconnection board and how to reroute them in a manner that doesn't let the magic smoke out of some very expensive components

I've done this both on an 004 and an 005 I have never touched an 006. I'm sure given enough time we could figure it out

Thanks all, Ive had to order some tools I might try to get a boreoscope into the cylinder soonish (I leave on a trip soon so tinker time is short). When I do get some info I'll update.

Or 3

Sheps hurricane rules: Never let the car below 3/4 before the storm Have enough generator fuel for 72 hours. If you are trying to buy gasoline: wear a helmet dont go to stations off of major roads/ exits

Unfortunately the set ends up right outside my bedroom wall otherwise id be game

If it does I do have a spare engine in the shop

The original owner did say it got loud (hole does that) and after he couldn't get it up to speed.

So has anyone seen this? New purchase, It was cheap enough and i have spare parts so fun project incoming

P.P.P.P.P.P. Prior Planning Prevents Piss Poor Performance. I have festoon lighting over the pool in the back yard, its programmed to come on every night so my neighboorhood is pitch black except for my house being lit up like a friggen Christmas tree

You're welcome. As WWRD99 also stated a double male cord. We also call them suicide cords. There is no reason to ever make or use one.

Using your welding plug sounds like a Widowmaker setup.