Search results

We have used our M35's for water trucks out here in the sand. Works great with heavy loads and low gears.

I've gotten the , I'll pay extra and give it to my friend when he picks it up before and also the I'm at a military base and about to go in the field so respond to this different email because I have no access to a phone. If you get a response and it's more than a couple of sentences long beware !!

Please make sure you contact the guys at the location to schedule a pickup time. It's best to keep them happy!!

I always check those 2 way check valves under the cab behind the driver step if air is coming out of the front gladhands. I've had the brakes lock up if I close off that front glad hand also. Easiest way to check is take the valve apart on the truck and check the diaphragm for holes or cracks.

Easy fix! Flip up the cab and look behind the driver side cab step and there are three air check valves inline. It's probably the top one with the sensor, there is probably a hole in the diaphragm. Usually need to replace all three. The complete valve is a haldex KN25060. They also make a...

Look at your invoice and it will show in the fees which you picked, I think it's $50 for SF97 and $150 for title. You can check with your DMV and see if they will accept the 97 if you want to tag it. If they will not take it , go the title route, even if you requested the SF97 you can send it...

If you paid extra money for the title , you should get a title from Montana. This will take longer because GP has to get the SF97 and send it with paperwork to MT and then get it back and sent to you. Usually another month +|- for the title. Dont get in a hurry for HMMWV paperwork lol !

What kind of headlights did you get for it?

Behr special! Still have to finish some odds and ends but coming along nicely. I color matched from a fresh looking bridge weight plate.

You also need 2 door hinges for each side. Easy job though, have fun! I just finished one.

Welcome from Wilmington NC!

That's a good looking truck, looks complete!

Man, I feel for you on this! My friend auctionaddict and I worked on one of mine until 1:00 am trying to get that tip out of the head. We had a puller tool and it pulled the shoulders off and left the tip hanging. After trying every idea and tool we could create, we finally we able to get a...

Found the culprit of my air leak, just as Oxyacetylene said, the top check valve of the three under the cab and behind the step had a hole in the diaphragm. Replaced with new valve and all was good to go! Thanks again! I located the rebuild kit for the haldex 25060 and I will just rebuild on...

I am interested in cab parts also if you can find any over there !! I have tried contacting some Steyr dealers but no luck yet! Welcome to the LMTV club!

I agree with Suprman, the best bet especially for the starter and hose reel is to go straight to the battery. You can probably run the light bar out of the dash panel with no real issue.

Welcome from NC

Pm sent

I've found it pretty easy to get either the SF97 or you can request a title and they will send you a title from Montana. At least that's what I got on the last one bought from GP, it was $150.00 for full title.