Search results

I install mine in the upper neck of the turbo. The neck has two ports. Make sure you drill into the center of one of them. If you are looking at the turbo from the pass. side, mark the center and then divide that in half and that will be your center to drill. Basically, one forth of the...

I will try my best to make any date.

I guess what I am trying to say is, if you add all of your expenses over the year and compare it to your return, you will have a negative number. In my case, I don't really care what the truck cost me to own or drive. I am going to drive it anyway, because, I like it! So, If I can make a few...

These trucks cost about the same to operate as a civi 10 wheel dump. The civi dump can carry 3 times as much product in both weight and volume in almost half of the time. In most cases, If the ground is wet enough to require 6 wheel drive it is to wet to work, anyway. You end up causing more...

I use my truck from time to time on work related projects. The fact of the matter is it is not efficient enough to make money with. I use it, strictly because, I enjoy driving it.

There is a 12 volt alternator conversion kit in the classifieds. It is a plug and play unit.

Umm....Your new tool looks kind of short!:jumpin:

It sure would make for an interesting video if you tried!:D

Most of the time, a burnt vehicle is totaled not because it is unsafe to drive if repaired. It is totaled because the heat from the fire distorts all of the exterior body panels. The cost to replace all of the panels, Interior, dash, and wiring is not feasible. Philip

I thought that tread ended with a SS member going to get it????

Running things in series changes amperage not voltage.

I believe, If you put your master switch on the ground side on your battery cable, It should switch all of the power off to the truck both 12 and 24. Someone please correct me if I am wrong. I use the Bully Dog mechanical pyro. I have been very happy with it's performance. It is a very well...

I am into adventure. I would drive it. Why not?

I found a stem that will work. I do not have the number with me. It is a heavy equipment/forklift stem. I picked them up at a large truck tire store.

This is merely just a suggestion. I would not advertise STUPIDITY!!!!! It sure isn't helping your case!

Just what stump said. You need to take your time welding. Make random very short welds. try to keep the metal from getting any heat. Heat will distort your panel quickly. If you can get to the back of the repair, you can use seam sealer to make sure it is water tight. I would not recommend...

Beautiful aircraft!!! 4.9 million....I will have to save a little more pocket change. I guess I will stick with my paraglider for now!:-D

You know what I find funny, two of the m35a2's that we purchased from the government had GOVERNMENT/MILITARY BUILT MODIFICATIONS on the them. Now, why would the government put a mod. on the "PERFECT " truck? I will tell you... why! The truck did not fit the purpose that they needed!!! These...

easier to steer, sharper turning radius, better fuel economy, quicker acceleration, and much more nimble in tight parking lots, other than that I don't know.