Search results

How do they compare to something like a bobcat t650 or t750 as far as reliability, quality and as far as bang for the buck is concerned?

I came across a VW transporter and I like it. Wondering now if there are any for sale around here in the US?

Can someone verify whether the tail light assembly bracket is bolted on or tightly secured with Huck bolts?

I have moved the FLU419 the other day and forgot to turn off the main disconnect. Today I started the truck and the charge light lit up bright red, it usually turns off when I give it a short rev. But this time it stayed dimly lit. With the truck revving more it started to flash . When I turned...

Are there any Unimog gatherings in South Carolina or south east area?

I’m wondering how many U1300L’s are owned by members in the US. Do you have one?

What would be the way to get the dipper cylinder freed? It’s leaking a lot and I need to replace the seals.

Are there any around in the private market? How much money does a running unit go for?

Who’s got spare SEE tools they don’t need?

I had something odd happening yesterday. When I turned the battery switch key off , the switch stayed connected. Did anyone have this happen to them? And how did you fix it?

Does anyone have a write up on how to get the power steering tensioner loosened? I need to replace the hydraulic pump belt.

Can anyone post a picture of how the sending unit wiring connects? Mine have been cut and I can see where or how ground was connected.

I started to go through some of the checklist items and I noticed the transmission was low by 5 1/4 qt just about. Today I checked the front diff and it was overfilled by about 3 qt. I also found that the front air rubber lines are leaking . So I got to replace those tomorrow. Is there a...

I am not having any luck finding brass compression fittings in 6mm . Which is I think what the brake line size is of the Flu419? Does anyone know where they sell them?

So I’ve been greasing all the grease points on the backhoe and when I got to the dipper pin . A bunch of water came out. I went to move the dipper around a bit and it started to moan pretty badly. Then I got some wd40 , pb blaster followed by red and tacky spray grease. Moved it around and it...

Does anyone have the part number to a seal kit for the backhoe lock cylinders?

I can lower (deploy) the backhoe, but none of the controls at the backhoe do anything. Is there an over ride switch that would prevent anything to work? I can switch the RPM control to 2000RPM but nothing happens, neither on the driver side by the frame, nor the hi/low switch at the backhoe part...

If you did it and it wasn’t too much of a pain. Then what was involved ? If at all possible

Does anyone know where this parts belongs ? I found two- on either side of the frame rail . Update: I figured out what the two strips are, they are holding the bottom plate under the radiator to the frame.

What fluid should I fill the system with? Lubrication order calls for OE/HDO-10 which is I think a W10 oil? What is recommended ? Normal hydraulic oil?