Search results

Good luck with the other ones Jerry. I have had to put lots of heat and the big pipe wrench and grunt to break some free, they go back together with anti-sieze so the next guy wont have to fight with them. Ed

I was at a WWII show in Morgantown Pa yesterday and found this one.

Thanks for the compliments guys. Jim, I did not realize you had the other decals available or I would have contacted you.

Winner....LOL... I happened to notice that just after I applied it and stood back to have a look. Oh well.

Just finished this one, I had been on and off it for a while. It needed a pump and the correct button, I set the injector pressures, the bores looked good so a new head gasket and new head bolts, the compression and oil pressure were good, everything mechanical was good along with it's...

From what I understand, the crank on the 002 has both pistons going up and down together creating a lot of windage/pressure in the crankcase. The 003 always has two moving up and two moving down somewhat balancing out the pressure created by the piston movement. In my 002's pulling the...

OK, good to hear you got it running. Before this fall I have to get to mine and hopefully get at least one operational.

I picked up two Engineered Air Systems heaters model H82 HDU-36e from Ft Meade a few months ago but haven't gotten to them yet. What model are you working on?

Looks great as expected and great job on sourcing replacement parts.

Congrats on getting your units running. [thumbzup] Good work.

steelypip, I have been following that threat with great interest. Unfortunately I do not have a load bank, I just feed the garage and turn lights/motors on. I just checked my notes on this unit again and it is a #16 button I need as I have a #12 in right now and the pc mark is two hash marks...

Jerry, Thanks, you gave me the idea to build my own. I ordered the nozzles/pintle right from AMBAC part# ADN6S526. Great people to deal with. Ed

Good news on this one. I finally got around to working on it again and with a good pump from Jerry she fired right up. The rpm was still advancing on its own even with the throttle cable pushed in all the way in (same condition even with another pump but not the reason I needed a pump). What...

Yes, that selects the output.

Here's some close-ups of what I did. If you google homemade injection tester you will find many plans, I cannot remember which ones I used as I used several as a guide. I went with all high pressure fittings from McMaster Carr. I used an injection line as it already had the correct end for...

A while back I won a couple 002's and had to rob several parts from one to get the other one going (which was the plan from the start I imagine). This one wouldn't run well or respond to throttle inputs so it became the donor. I have decided to start gathering parts and see if this will be a...

Interesting info, thanks for posting it.

Have you had any luck getting that finned adapter off the nozzle cap? I ordered some new nozzle/pintles and wondered if I should bother trying to replace that gasket.

The gen looks great Jerry,congrats. That is some spring pack on that trailer.

I didn't have any luck with that link either, I just bookmarked it and access it that way.