Search results

Can you tell us what model number pre-filter you purchased? Based on the link below it looks like the one for my Cummins 12-valve is H002394. This is because the factory Cummins head flows 150-160cfm. https://www.donaldson.com/en/engine/support/datalibrary/000207.pdf

If I could provide a minor correction to your post above. It looks as though the topspin takes air in from the bottom perimeter, and as the impeller blades in the top of the housing spin the dust/dirt particles are accelerated and shot out of the 2 slots in the sides of the housing. How much...

Oh lord, another engineer around here. They let anybody in here nowadays! Good luck on getting your transfer case swapped out. File the lesson learned away and try not to repeat it in the future. At least that's what I do. I also try to learn from other people's mistakes so I don't make my own...

Louisiana is even easier than that. If memory serves me right I paid $15 for lifetime registration of my M35A2 with no inspection required.

Both times I removed the fuel pump assembly completely. First time was to replace the rubber discharge line and put double clamps on it, and the second time was to replace the factory pump lines with a SS siphon for the Cummins 12valve. If you want it done right I would remove it completely. A...

I eliminated the wet fuel tank issue by coating the top and bottom of the fuel tank gasket with Permatex The RIGHT stuff. Smear the coating on both sides, bolt the pump down, and smear a bead around the pump flange. No leaks.

I'm not sure if Marcus is on this forum or not, but below are links to a series of Youtube videos on bobbing a M931A2. I am not affiliated with anybody shown in the videos. I simply found these videos on Youtube and thought it would be entertaining and possibly educational for a select few...

Although I've never looked at a Cummins 8.3L engine up close the fuel shutoff solenoid should be very similar (if not exactly the same) as the Cummins 5.9L 12-valve engine that I have. Attached is a photo of how I converted my fuel shutoff to a manual setup with the standard deuce shut down...

Well that's one way to do it! :D

I would like to know about the PTO also. Is it a Chelsea unit on the xfer case? What are the specs on it (model number)?

Not sure who's picture I "borrowed" off the internet, but in the first picture below it looks like somebody had an aftermarket deuce hitch that failed. So to keep that from happening to me I wanted a custom hitch built to my specs. Although it isn't designated with a class rating I like my...

Crazy question but did you tighten the lugs in the correct direction on the ones that are spinning? In my haste of building my bobber I loosened a few lug nuts the wrong direction with my geared lug wrench and I stripped the threads. Just checking. The paint was so thick on the stud that I...

Choose the one on the right. $99 shipped. I've had it for a few years with no issues. I use a torque wrench for putting the lug nuts back on. http://lugwrench.biz/buy.htm

Another set of pictures from Garrett on 05/24/15:

Another round of pictures from Garrett on the repaint of my bobbed deuce:

In typical fashion I go against the norm to be different I guess. :) When I tried painting the deuce myself with Behr latex I ended up with a contaminated paint job thanks to my helper. Too late to fix it by the time we caught it. I ran out of steam and just let the green Behr fade into a...

Would a replacement engine be any cheaper? I sold mine for $800 with the 5 speed behind it. (For reference. Don't not know rebuild part costs.)

Additional pictures from Garrett on the repaint of my bobbed deuce. Notes: - Changed colors midstream. Now less yellow (starting with pic #13) - Rapco 686 Tan used as color to shoot for - 2 gallons of paint used so far

Attached are some paint progress pictures from Garrett. Notes: - Garrett ran out of red alkyd primer so he started using gray - First round of tan top coat was too yellow (pics 8, 9, 10) - Second round of tan looks much better (next post after this one)

Facebook