Search results

Try here, https://www.titansystems.com/services/ecm-board-repair/

I can say, I have not seen a post centered, only the one time I was typing. I do look at quite a few posts. I figured it was an update that triggered the settings. I just fixed what I saw on my end. I am using Chrome.

OR, it has had 2 failed starters. 1st one failed by not spinning the bendix out, who knows, maybe just gummed up. 2nd starter, although rebuilt, who knows how long and what conditions it has been stored/sitting, maybe wrong pieces installed, the bendix isn't spinning out on that either. OR low...

You can change it like in Windows on the tool bar. I noticed it a couple of days ago while messaging with someone. In the middle of typing, it switched to center. I thought I somehow hit the tool bar and changed it!

Most are here in the library/TM section, https://www.steelsoldiers.com/threads/m39-series-manuals.218597/

There is an 816 up for sale. It is a tow company vehicle based out of Santa Clarita, Ca, but, I think the truck is in Monterey Park. They have contacted the Museum about donating it to us, I did some looking. THEY think it is a 543, but it is an 816. It is a working truck, maintained for heavy...

The 6602 in the M62 had HORRIBLE fuel consumption. No kidding, 4 gallons of fuel used in a 30 min operation of the upper. It always had black smoke, kept dropping holes after cleaning the plugs. It was much worse before the Zenith install. Last week I put some civilian NGK plugs in it with...

IIRC, DDEC still uses the switch up on the blower. Could be un plugged or out of adjustment or been removed.

It might be a good idea to make a visit to the TM section and find the TM that has the wiring diagram in it. Again, I do not know the HET, the above is a generic TS guide. There might be electronics involved, like DDEC or a trans TCU. EDIT, Just looked at the HET via Wikipedia. It is indeed...

While I don't know a bunch about the 1070, I do know a bit about the jakes. Some things on that set up to look at, power, like others have said, if there is power, look at the trans lock up solenoid, if unplugged it will not complete the circuit, IIRC it is a normally open switch, you can just...

Bump. Make an offer and I will get ACTUAL shipping for the total.

Bump. Make an offer, funds need replenishing for the next project!

Bump, Price drop, $75. plus the shipping. SHOULD put the total at $105.

Bump. Got an offer? Let's hear it!

CPL 891 was a Cummins ReCon CPL. It was generated because in order to update the 531 and a bunch of other 400HP engines, like the 614 MVT engine, it needed to be EPA certified. The 891 is just the updated older CPL. Things updated were piston dome, ring pack and placement of the ring set on the...

OK, this looks like the final update on the M62 revival!! We installed a Zenith carb, it made the 6602 start better and run somewhat better, but we have had an issue with dropping random cylinders. When the plug is removed, it is fouled. Clean it, re install and it runs fine for a bit and then...

Very good! Hope he comes back. Pictures!

Have you tried looking in the parts TM in the Deuce TM section, finding the studs and see if there is a description there then look on line? Maybe some of the bigger vendors, Easter Surplus, Boyce, Memphis Truck?

Try here, https://www.dynaflexproducts.com/_files/ugd/54381a_123109d14c224ba2b708a41d2bc4595d.pdf

Smoke. What color? White, black, blue, grey? It is a diesel, so some smoke is normal. Like @Mogman said, change the fuel filter and make sure there is good clean fuel in it. Also, MV gauges can be incorrect. Put at least 5 gallons in it. Does it start hard, meaning does it crank an extended...