• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. williamh

    Putting IP back in and Timing Refresher

    It’s an old post but has lost of info
  2. williamh

    Putting IP back in and Timing Refresher

    https://www.steelsoldiers.com/threads/m35a2-timing.58845/#lg=post-685608&slide=2
  3. williamh

    Broken nut on regulator

    :ROFLMAO::ROFLMAO:
  4. williamh

    Broken nut on regulator

    My bad. On the info. It’s a 72 Dodge Dart w 225 slant 6 but been modified to look like an amc hornet. With a 6.5 non turbo 200a charging system.
  5. williamh

    Interesting Helmet Top

    Looks like a fiberglass mock up with a minmimal hard plate around the gunner. The one on the pallet is missing the b pillar
  6. williamh

    Putting IP back in and Timing Refresher

    I replaced the IP on my Duce several years ago. Aligning all the marks before tightening everything down was less of a challenge than getting to the TDC mark by my self. Clicking the motor to get it close than using another tool to spin the motor to the correct spot. No space for a breaker bar...
  7. williamh

    Putting IP back in and Timing Refresher

    Be sure your using the timing mark for the correct motor and turbo application. 😵‍💫
  8. williamh

    Broken nut on regulator

    Was doing some maintenance on the funvee trying to figure out a failure to charge and found the nut on the connector to the voltage regulator was split and letting the plug out. Anyone got a part number ? Or a idea of a replacement that could be sourced from another panel ? I can’t believe that...
  9. williamh

    Wife wants me to do the unthinkable due to the Florida DMV debacle!

    I got my m1123 registered using dirt legal. Perm on road plates , no restrictions. Plates expire before me. No regrets.
  10. williamh

    In Search of 9.00x20 Tires for M211

    Any 9.20 tires will work on the 211. Contact csm tires they have good deals. The only difference from all other tires from the 211 to the m35 to the a2 are all the same. The only difference was the m135 that had a different offset on the rims. They were fitted with the 11x20 tires.
  11. williamh

    New Member - Southern California/Arizona

    WOW 😳. I didn’t realize there was such a thread go get a toy camper. I’ve had my shop van for several years , it’s a ton of fun for camping , mine is completely empty in the rear except the repair table and rifle rack. Perfect for my “camping” , I also have the 11X20 tires. But I also have the 5...
  12. williamh

    Self Canceling Turn Signal - NOT the wheel ring

    Your gonna make another left at some point. 🤣
  13. williamh

    Batteries.... ?

    I just had the batts in my 1123 fail this week , this post is perfect 👍
  14. williamh

    M35A2 & trailer tires?

    Try this link https://www.steelsoldiers.com/threads/1100x20-firestone-t831-tires.212638/
  15. williamh

    Tire talk

    if your using the original rims 12 or 24 bolt. Those are 16.5 rims. Almost NOBODY sells 16.5. 16 or 17 , easy going , and finding nice rims either the correct offset. Not as easy without spending $$$$
  16. williamh

    If anyone in the San Diego county area is familiar with the M800 series

    Did you get it to start ??any updates ??
  17. williamh

    If anyone in the San Diego county area is familiar with the M800 series

    Sometimes those starters get “stuck” and won’t engage other than a loud click. Or ( this would be bad ) the motor is locked up for some reason. Try and rotate the motor. See if it spins, if it doesn’t than pull the injectors to verify the cylinder isn’t full of liquid.
  18. williamh

    HMMWV in limp mode no trans light

    Could have been there was something else connected to the 12v supply. Or they figured if they disabled the trans that they could get rid of it and got a new tactical vehicle. ??
  19. williamh

    Starting problem

    Does it have a keyed start switch or a push button ? , I’m only familiar with the a2 that has a power switch and the push button start. I’ve seen modified ones that use a key switch to control both functions. More info is always needed
Top