Search results

Tobash have you modded the engine in ways that your thing it could actually need a 4" exhaust? If stock that engine was just plain happy as a clam with 3" tubing. If your just doing it to be cool then just cut the existing pipe and weld you bigger pipe to that.

Normally you would have two options 1 fix it 2 replace it. I am guessing the hole is not small? and being it was speared from the outside inward it may be difficult to pound out and then weld a patch on it? It will be likely easiest to replace the tank, I can think they would be that expensive?

Blutow it sounds to me like you have a pretty good start on this. If you haven't changed the lube in the diffs I would sure give it a look and just crack the drains and see if you get any moisture out and then look open the fill plug and check level and get and idea of condition. As far as the...

I used to drive me Deuce in the winter and I live in ND and this is what I did to make the truck usable in the winter. Seal all the holes in the firewall and make sure door and window seals a decent insulated the inside roof of the cab with tractor insulation about an inch thick opened up the...

I have always gone the feel of the pants being equal to a 10% HP increase, meaning if your can actually feel a difference in driving the vehicle its at least a 10% increase in power. By changing the amount of air going into the turbo will you see that increase? I highly doubt it. The turbos...

Ramdough if it were mine and because they are pretty ugly looking, looked like bolts that pulled through? I would pound them flat with hammer on both sides and cut steel patches and weld them in place then grind them flat and coat the patches with a light coat of bondo then sand and paint. My...

Mullaney that sure seems like a good suggestion to me I will pull the case open and take a look they are obviously replaceable and can be pulled out. Thanks much good suggestion!

OK the TM for my truck shows how to change out the paper to put new paper into the unit but says nothing about running the unit with NO paper, I agree with the statement that its going to ruin the pencils/drawing device but in all seriousness I will never use it for graphing anything nor do I...

Good looking 939 and its nice to see your taking care of the maintenance needs, this truck should give you years of very reliable service!

nobody knows about this device?

Hey guys I have an M920 and of course it has a tachograph in it which I unplugged when I got the truck because I was told to not let it run without recording paper in it, the unit appeared to work fine when I unplugged it but is there a way that I can use this unit and possibly disable the paper...

I dont know if I have ever seen an M977 that wasnt beautiful!!

Thanks guys for the info on this subject! Its also not that I expect it to have a problem its that I would like to minimize the possibility as much as possible to stop any issues before they start. The truck has always run extremely well and has been very well maintained. The last thing I...

Hey guys I am going to be getting my Deuce ready to sell this summer and its been parked in my warehouse for 4 years and not run. I will be of course getting new batteries into it and since this truck has never not been used on a regular basis under my ownership this will be a first. Can you...

In starting to read this post I absolutely knew what was coming! There isnt one of us who hasnt been in this position before, usually to many times!

Confirm in your TM that its a ground and you should be able to attach it to anything solid and close to the firewall, just make sure that whatever your attaching to is not rubber mounted.

Hey guys pulling the hubs and inspecting the bearing on a Deuce is not a big deal at all, no need to worry about doing it. Two things I would do is watch a video on it on Utube then I would download the TMs for doing this and read through those to make sure you have all the tools, seals...

Thanks much Simp I figured it would be something like this! Karl

Hey guys I am getting my M920 out of hibernation this spring and it has been in my warehouse for 3 years and has not been used. As most of your know this truck has the CAT 7155 airshift semi-automatic transmission in it and the trans has always worked great but it has never sat this length of...

I had an M37 with problems very similar to what your experiencing and I went through the carb, point condenser and cap still no start. I talked to John at Midwest Military and he had me describe the type of coil in the truck and said they are BAD very unreliable so I bought a new coil from him...