Search results

Yes, the tires and run flat inserts were completely clean and dry when assembled. I did not add the run flat grease/soap since I would not be driving any significant distance in the case of a flat tire.

Sorry for the delayed reply, it did get it mostly resolved (thankfully very simply!) and I've been busy putting some miles behind me for the last couple of days (in Canada now). Before swapping a front wheel for the spare, I tried changing tire pressures to see if that had any affect. I...

I was running 85 psi cold. I did not check the toe in, I don't have calipers but I could use a tape measure to at least see if it is way off. I assumed some "floatiness" was normal, these tires have a very rounded profile so only the center lugs make full contact with the pavement, that...

Ok thanks, haha maybe I just chose the wrong tires, I thought I was doing good by going with brand new ones. I'll stick with MV/Ts next time.

Thanks, that was my thought as well. On the steering topic, are all these trucks "floaty" at speed? Mine is, at speeds above 60 it can get a bit floaty feeling, I assumed it has to do with the tall flexy sidewalls.

Thanks for the suggestions, tires have 2022 date codes, the spare matches. 14.00R20s fit in the spare location, they just stick out a bit further. A mobile mechanic came and looked at it and he thought it was steering related, but wasn't able to help much beyond that. I'm more inclined to...

I'm on my way home to Alaska with my M1079 and I'm getting some severe vertical wheel hop on the front axle to the point where it is undrivable above ~40mph. I've got about 1000 miles on brand new 14.00R20 tires with balance beads in them, there was some minor wheel hop since the start but I...

Well, I made it as far as Spearfish South Dakota, I'll write more about the journey later. I've developed some pretty severe wheel hop on the front axle. I'm going to try to find a truck shop to get the front end checked out, but might not have much luck on a Sunday. Any troubleshooting...

Wheels tires, and filters galore! I got all 5 tires mounted and everything went ok except for a couple of spun studs that mount the split rims together. They should be good with the remaining 19 bolts right? Is there a field expedient fix for spun split rim studs? I got the 3 piece run flats...

And it begins! I made good progress today, got the ecohubs installed. Tires are next on the list. Before, during, and after photos:

Thanks @Ronmar, I think I'll order one of those flasher modules to have just in case. I'll only have ~3 days to work on the truck in Illinois before heading north so I'm trying to get everything I'll need before flying down.

Small world, I bought it from Green Valley just south of Peoria. Not sure, the turn signals/hazards didn't work when I inspected the truck. I didn't have time to fully troubleshoot the cause at the time, but I noticed that the hazard relay wasn't original, so I'm hoping it is a simple relay...

Southcentral/Anchorage, give me a shout when you head up this way if you want to meet up or need some Alaska info. There are a decent number of FMTVs running around up here, a couple of my coworkers have 6x6s and helped influence my decision to pull the trigger on mine.

Yes that is definitely the plan, I'm looking forward to the fuel savings - the Ecohubs should nearly pay for themselves on the trip home!

Nice looking truck! I wish mine wasn't repainted black but having a solid truck was much more important than the color. Where did you find your spare air compressor head, all I've been able to find are complete compressors? The suspension seat bases I ordered are only 4.75" high at full...

Thanks for the info, good to know the 1/2" gun is adequate for the lugs. The 3 piece run flats are from forum member MAdams, he only had 2 to sell so they're going on the steer axle. They are getting hard to find at non-scalper prices. Is this the correct blinker module? If so I'll order one...

Thanks, I went with the 14.00s mainly because they were the best/newest tires that I could find at a "reasonable" price at the time I needed to place the order. I tried several places for 395s including Feltz (great guys!), but all I could find were surplus takeoffs that were either older than...

Hi All, I've been considering a MV for many years now, I originally joined this forum way back in 2011 when I nearly bought a surplus M35A3 at auction. Back in March I finally pulled the trigger on a cherry 2008 M1079A1R in Illinois with plans to drive it home to Alaska in June. I've started...

A couple heavy boxes arrived in the mail today! Has anyone run Ecohubs with 14.00R20 tires and stock 3.90 gearing? Would that be too tall for the engine to cruise in the happy zone of the powerband at ~60 mph?

Thanks for all the info and advice! I'd love to have one of the full featured SWICE kits, but I think that will have to wait a bit. There's not much room left in the budget at the moment after Ecohubs, new tires, and tools are accounted for. I'll probably start with the Dearborn adapter + Cat...