Search results

I´ll try. And yes - this car has great grounds :D You should have seen my face when i opened hood. Edit: opened 4 injectors, there was some air, crancked - still no fuel from there. Maybe lift pump is just old and weak? Opened screw from fuel filter - when cranking, there was dripping, but not...

Thanks! Jes, big pink shows 12V. Maybe i just need run starter longer? It ran great, quicker than my 12V 1009. But after some 5 times by 10 seconds battery was pretty much empty.

Took picture about this "clicaty-clackaty" from other topic: As i understand, i must take IP upper cup off and check is this solenoid working correctly? If not, there no be fuel from injectors or return line? I am not good at all with diesels.

Situation so far: * fresh fuel, fresh fuel filter * lift pump is working * fuel filter primed * glow plugs are working * no fuel from IP return line * green wire to IP "clicaty-clackaty" relay has no power, made wire directly to battery plus. very quiet click... still no fuel from IP return...

Two months of excellent work!

OK, finally home! Came on trailer, whole day was raining. Tomorrow i try to start engine. Today one friend come to help me :) First visible flaws: tank is leaking, drivers side cab corner is rot, same thing on floors, missing lights switch, few dents. Otherwise in pristine condition. I am...

Heh, same body but RWD. Those 4WD versions were and are very rare. 37HP :D

Yes, that is the way. Last time i installed this way window, was 25...30 years ago. On old Moskovich :)

RPO label shows paint option:

Jep, balancer already ordered. And for vacuum hoses i have some 20metres nice and soft silicone hose. Meanwhile i got sliding rear window from old 80s Silverado. I hope it fits :)

Thanks for information and warning. I have use for this rack. Probably just relocating drivers side-one to M1009. But first i must try to start it and get it home. My checklist is: * check fuses, power to IP, power to glow plugs; * check glow plugs ohms (as i understand, without working plugs...

And my first question - what rack it is in red circle?

Well, i made deal for new toy - ´85 M1008 this time. Pretty rough for sure but it suits better for hauling wood from forest, maybe plowing later etc. Usual rust places - cabine corners and floor (damn sound mat and carpet). Otherwise original, 24volt, exept pushbutton plugs and sturdy winch. I...

Dear cucvrus, no i dont need this part, i am just curious if there is cheaper option just to help, who need one. Nice tho, that you find Estonia ;) edit: Find one more: temperature switch 37C / 98.6F. ca $7...

Well, i found some options - VDO is pricey, as usual, but OHD is promising - isnt it? VDO OHD I will keep digging.

Thanks ezgn, no i dont need it, i just tried to understand it and maybe make something, with reasonably priced one.

So, basically it is similar, for working principle as usual temperature sender? Maybe more correct temperatures/ohms, nothing more?

What makes this fast idle temp. sensor so expensive? Does it have different working principle as normal temp. sensor?

Test post.

It is probably speed sensor, not tach. Atleast that i find in the interweb...