Search results

Most were there, about 3 or 4 missing

Thank you for your reply . . . Just pulled off the dash plate to discover that the plug at the back of the light switch was unscrewed and disconnected. Kinda strange, wondering if somebody disconnected it because there was a drain on the battery somewhere. Will have to wait and find out...

Finally back to work on the truck. Replaced all fuses and relays, still no lights, turn signals, brake lights, hazards When I purchased the truck at auction, their report showed a picture of the headlights working. I had the truck shipped to me and haven't driven it other than to get it home...

Thank you

No the rails don’t come to the ground, I found they don’t need to, the bed loads right on easily because the winch hooks under the bed not on the end, thus lifting it higher I may be able to make a video or maybe post more pictures when I get back from fishing

OK, here's an update, geeeez this is turning out to be a royal pain in the . . . Called Gemplers, gave them the part numbers on the invoice Simp included above. Nobody knows what to do with those numbers. I ask for Tech support, they say it is a non stocked item and they will call the...

The Hoist and winch on the truck in the pictures at the top of this thread weighs a little under 1000 pounds. There are a few advantages I felt to the hoist and winch system . . . Weighs less, I needed the extra weight capacity for my camper I now have a winch I can use to pull myself out...

Mine is an A0

Right, forgot to confirm the voltage was correct on all of them. Will have another look. Looking around the forum on this subject, it was pointed out by Superman that you can use 5 pin spdt, for all of them and forget about the 4 pin spst relays. the extra leg/pin doesn't matter and makes...

I don't know if the correct relays are there. My cover doesn't have anything on it. I downloaded the spec sheet identifying the relays and fuses. I went through the relays to confirm the correct number of pins were on each one according to the spec sheet, and they were correct. I guess the...

Since I purchased my M1078 the headlights, tail lights and turn signals haven't worked (or at least I haven't been able to figure them out). The truck has mostly been in the shop since purchase having various fun stuff added to it (dump frame with winch, started overland camper build, etc)...

It unloads and loads easily. Takes about 2 minutes to unpin and drop the bed Takes about 5 minutes to pull up to a bed and winch it on

Uploaded this picture because the previous posts picture showed the bed being loaded from an angle

Thought I would share my latest project. Decided I would make this a multi use truck. Built a dumping frame with a winch so that I could make the bed dump and make it removable so I could drop the bed and pull on a camper when I want to get out of town. The beds pin onto the frame when...

OK, got it will try that tomorrow Thank you

Thank you!

I just went onto Gemplers and looked up #s or4201a and S01978245. Neither number comes up on their system. I see it on your invoice, it should be easy to find, but no luck. When I talked to them today, they said they discontinued a lot of their tire stuff. I did find the O-rings on Eriks...

I called haltec, they said part number or420 is .5” diameter and they don’t have an o ring to match the specs I called gempler and they claim not to have the part either I called les schwab and they only have part number 50184 which I think is for a humvee I’m striking out here. Why are...

There are lots of threads regarding the tire o-rings for military trucks, but having a hard time finding the part number to confirm I am ordering the correct O-Rings. Anybody know a good part number and a good source? If I understand correctly they are 20" x 3/8" thick?

Thanks for the tip. A semi truck cooler would be good. Was hoping somebody might have a lead on a cooler from a M1088 or M1083