Search results

4 pins and 2 ground wire and the whole platform lifts off. tank is only on the top front there. In this case in front of a 1040

That is part of a Drone support trailer. I have two trailers with that plat form. 30 Gallon fuel tank, also a spot to put a mep 531a and lock into position. plus the mep 803a

I believe the inputs are just anderson connectors so i will have to figure out what size those are. just read the manual for another cannon load bank, but for one that will do 480 looks like this is pretty straight forward 1 or 3 phase 120, 240, 208. Never used a load bank. I will try to write...

Meter knob is broken, but have not messed with it other than that. Everything inside looks like its in good condition. Hopefully going to be a good unit for me.

Bought this in a pallet from Gov Planet. can't find information about it on Cannons web site. No manuals any help or information would be appreciated

Northwest Ohio its 21 degrees and sunny. pretty happy with that

Make sure all the air is bled out of the system and that you take the injector nozzle apart and make sure its not clogged or not seated all of the way

I have 3 1040's for sale if you decide to go that way.

unless it runs on the auction ad. i would more than likely consider it a parts machine or at least one that is going to need engine repair.

10-32X1/2 Slotted Hex Washer Head Machine Screws 18-8 Stainless Steel (50 Pcs) #10-32 Stainless Steel Locknuts with External-Tooth Lock Washer,50-Pieces,Kep Nut 10-32x3/4 Stainless Steel Slotted Hex Washer Head Machine Screws 18-8 Flat Washer SAE 18-8 Stainless Steel your going to need these...

This is what i buy for the return lines. Since it is red i can identify which ones i have changed. https://www.ebay.com/itm/173956510973 3.5mm Diesel Fuel Injector Return Line Hose Made in Italy Also just be patient if your going to replace return lines as you will be removing the top of the...

So does this mean you got your new bags in less than 20 weeks?

Do you have the ability or equipment to move the generator. 802a weighs 800 pounds 803a 1100 pounds. Also 831 i think is only rated for 3000 hours before overhaul

are they in the outside lot or inside warehouse. I asked because the warehouse requires an appointment and they are over a month out unless you are LTL carrier. Outside yard is no appointment required.

Another paper weight sold today listed as 831a but was really a 813a

pretty sure that is my problem but i just have not had time and weather to take it apart again.

No update on the Hydraulic pump yet as its too cold, but the big storm left 6 inches of snow in the cab due to missing weather stripping on driver side door. decided to put it in so no new snow in the cab, but could not shut the door once i got it installed. took the handles and door panel off...

Ray, i do not think he has enough post to PM yet

Do you have a picture of this plastic ring or a item number of something that you use as the spacer