Search results

Robo I think you are doing a Great job at being proactive in getting a list compiled to help both the supplier and the buyer of parts. :goodjob: As many Jeeps that have been built and the many left in Europe I think that there is still unopened crates of them there. :carnac:

Very nice! Incredible to see mechanical equipment that was powered by either human or animal power. Most of the tools or equipment that was used is lost to the ages. It is fantastic that there are still people that saved and still can use such devices. In my part of Missouri we have several...

Welcome from SE Missouri. How much can a ambulance shelter weigh? And have you checked to see how your HMMWV was outfitted in the beginning? It might have added capacity springs already.

Using air to blow out, clean out line of crap or clean fuel tank sock is ok to do, as long as you do not blow off the sock. Blowing air into fuel line towards tank will clear line. But blowing air into tank and pressurizing fuel line towards injection pump may show a leak. But you will have to...

The truck starts and runs for 5 seconds. First I would get some amps going into the battery. Put on a battery charger, with the continued cranking and not running, recharging battery is not happening. The ground cables and secondary grounds need, must be in a+++ condition at all times...

Another Fantastic Group! And the Short Line with 80 Ton Engine, well I am glad that there was a Mule this month.

I have to replace one on my 1008A1 and seen this old post and thought about reviving it as I thought it was an excellent way of doing an installation on the cheap. Great Idea edpdx, I hope it does well.

Very nice short video's of wear tolerance, balance problem that becomes a huge problem. Most times the problem has a preventative measure that has been overlooked. Mounting hardware, rubber isolators, rubber mounts or lubrication joints, overlooked or missing grease fittings. and can not be...

LMC window channel kit 38-5651 $99.95 2017 Dollars Shipping and handling was another 18.75 Both sides, window channel and window rubbers inside and outside. 913-541-0684 World Wide Orders While you are inside doors, check the regulator and the plastic rollers to see how they are. Grease...

LMC is what I use. No complaints here and a good product. While I had door disassembled I went and cleaned the inside of door well and painted, undercoated. 30 years from now someone will be happy I did.:carnac:

I am really partial to Mules, stubborn and sure footed. Yep, easy one for me.

Locking nuts are used.

Welcome from S.E. Missouri! Land Between the Lakes, Do you get to fish very much? I watched an epic battle off an old highway that died into Lake Barkley between a 25 pound mudcat and a fly fisherman for 90 minutes. Did not think it was possible, a fly rod. :shock:

NDT is right on as a little heat on the adjustment sleeve will break the seizure of the threads. Work it back and forth a little at a time and if one end is open drop out the rust as it will act like glue by getting into the threads. Good Luck

Having more experience with K30's than K5's or K10's, I have always used knuckle blocks to keep less stress off the steering box, pitman shaft bearing, and frame rail. I have never used the arm as I see an increase in lever stress with the arm. I guess it is a matter of preference, once you add...

Would you happen to know the diesel dermanater?

Thanks for the video, now on to some electrical work or are you ready?

^^^^^ Exactly Dump Fuel and check for what kind of contaminates are in there. Pull tank and look for rust. Rust has to be the worst.

Welcome from S.E. Missouri. 77' Elky will work as the truck is long to begin with and will have ample room for a 6.2. Find a 73' or later 4x4 truck with drivetrain and get started. I still see two around built in the mid eighties and they were built back then, and have been continually updated...

Wolfen have you been able to trace down the breakdown issue?