• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Kenneth Cole

    Engine killed

    Hi Was driving home and she started acting like she wasn't getting fuel. Started lunging and as I turned up my driveway she killed and would not start again just would turn over. I pulled the hose off the output on the fuel filter and fuel is coming out. So what do you think I should check...
  2. Kenneth Cole

    wiring diagram

    Hi Where can I find a wiring diagram for the 1995 humvee? Thanks Ken
  3. Kenneth Cole

    Generator output

    Hi 91 humvee with a 60 amp generator. I cleaned out all the brush dust and the brushes looked OK. Looked over the regulator and didn't see anything obvious . With it running and the voltage gage is running in the middle of the yellow I am reading 25 volts . The gage will run in the green at...
  4. Kenneth Cole

    brushes ingenerator

    Hi How do you change the brushes in a 60 amp generator? Ken
  5. Kenneth Cole

    Charging problem

    Hi I know this has been talked about before. But please bare with me. Last night I went to town and the volt meter which usually starts out in the middle of the yellow and will go up to mid green in a few minutes. But this time it stayed in the yellow and by the time I got home (around 50 miles...
  6. Kenneth Cole

    Soft door skins

    Hi There is a you tube video on a compony called (Sea Shepherd UK ) that makes skins for recovering soft doors. Has anyone herd or dealt with them? Thanks Ken
  7. Kenneth Cole

    Replacing soft door windows.

    Hi Need help. I had read on here that there was a TM on replacing soft door windows but I cannot find it. Any help would be appreciated. Ken
  8. Kenneth Cole

    Voltage varies

    Hi My 1991 humvee's voltage some days stays in the green all day but sometimes it will drop into the yellow for a few minutes then go back into the green and then back to the yellow. Is this something to do with the voltage regulator? Thanks for the help Ken
  9. Kenneth Cole

    Fuel pump bolt sizes

    Hi Of all things the bolts holding on the fuel pump and the plate behind it worked their way out. To make it a lot easier if someone would know what sizes these bolts are I would really appreciate it. Ken
  10. Kenneth Cole

    humvee decals

    Hi Need help. I lost the source for replacement stickers for inside and outside the humvee. Ken
  11. Kenneth Cole

    Will not start

    Hi OK here goes. Last week If she sat for a day or two I would have to turn her over several times before she would start then she would be fine the rest of the day. Not knowing The cause I changed the fuel filter. Anyway then she wouldn't start at all. Found that I wasn't getting fuel up to...
  12. Kenneth Cole

    Will not start

    I know there has been a lot about this subject but here goes. I started my 1991 and drove it about 50 feet and parked it. The next day I tried to start her and all she would do is turn over fast but fire up. The start light seemed to take longer then usual to go out and I can hear the...
  13. Kenneth Cole

    autozone CV half shafts

    HI I see that Autozone carries half shafts for the H1. I would assume they would fit my 1991. They list three part numbers (16058n),(16059n) and (19060n). I need the front left and right shafts. Does someone know which P/N would that be? Thanks for the help. Ken
  14. Kenneth Cole

    Outer CV boot

    Can someone tell me where to buy an outer cv boot for my 1991? Thanks Ken
  15. Kenneth Cole

    Unknown fittings

    Good day Have a 1991 Humvee 6.2 and I am wondering what these fittings attached to the radiator are for. Thanks Ken
  16. Kenneth Cole

    Antenna hole grommets

    Hi Has anyone found a source for the rubber grommets that fit into the rear antenna cable holes. there about 1 3/8" in Dia. Thanks Ken
  17. Kenneth Cole

    Glow plugs to get

    HI I have a 1991 and am looking for new glow plugs. I see on Ebay that the price varies quite a bit. Is there brands that are good and ones to stay away from? Thanks for the help. Ken
  18. Kenneth Cole

    glow plug cycle time

    Hi How long should the glow plugs keep cycling when you start the engine? 1991 Humvee. Thanks Ken
  19. Kenneth Cole

    Rubber seal around soft doors

    Good day Has anyone added or replaced the pop rivets in the rubber seal around their soft doors. In some areas the seal rotates to the outside causing a poor seal. I have tried to drill into the rod to add pop rivets with no luck. It acts like the rod is hardened steel. I also have tried to...
  20. Kenneth Cole

    Overhead console

    Good day I built an overhead console for my radio and thought I would post some pics. Made of plywood and hardboard with aluminum edges. Ken
Top