Search results

Still got to paint and mout 5th wheel as well get rims and tires, probably be ready after Summer hope it rides good will see..

Trying to load pictures

After 2 years we are getting closer to road trip to recover a x AirForce flatdeck trailer, rear set up out of a 94 357 Pete 3.73 gears andfront axle out of the Pete as well , need a few things will probably end up with 425/65/22.5 in front , now the loners are 385/65/22.5 and probably super...

The pump on the M900 series 8.3 is similar but not the same as the smaller brother 5.9l, with that in mine, does mods will wake is it enuff for a great running truck as far of the EGT's the exhaust housing is good diameter so you should be good, probably would not be a problem unless you pulling...

Yes is strip down

12 wire

rewired I forgot to mention i only have good running engine and gen head nothing else , plus where i am putting it will be easier like a civic unit...

Did a good search and could not come up with anything, has rewire one of this units to 120-/240 volt with a aftermarket voltage regulator on like a zig zag configuration...

Yes you need a complete HMMWV 6.5 turbo engine or one out off a VAN, those are the only 2 options, the block is made for the center mount turbo with the oil feed and return by the block but also the head to intake bolts are 60 degrees instead of 90 degrees on a 6.2L , off course if the engine...

we put a turbo diesel engine with a tb 400 the factory engines where ruff

finally together Is being a few years that we took the turret of, this weekend we put it back on, next week we start with all the bearings and shim adjustment ...

3ton i think we cut the bed frame if i remember

Good a friend of mine just got a M1083 and we will attempt keep us posted...

the answer is if the pins are in the same location yes if not change the pan harmess to a civic is not difficult

I did the swap om my M1010 with the US shift few years ago and it has being to Alaska and San Diego in those 2 convoys and works great with the US shift, the 4l80E i used came of a 6.5l truck after rebuilding with a trans go kit and deep pan has never had any problems....

I did my HMMWV works great

to munch to list you can call me 305-218-0640 between 12 noon and 4pm during the week no weekends

gave up on that

Bumper Looks good but will not work for me , trying to put it my 83 AUTOCAR and it is a flip forward hood, plus i should have being more detail about it, needs to be the strait type one not with the curves at the ends . thanks willie

Who's going to mount Dora FLORIDA this weekend to the rally that has a front bumper to a M915-16 or maybe AMRAP thanks