Search results

Try the -12 lube order in the deuce TM's.

This one ? M109 camper conversion

Welcome To SS , your probably going to have to get a bonded title in Texas . Your also going to need the TM's start with this one ; TM9-2320-209-10-1.pdf TM9-2320-209-10-1 Operation, Installation and Reference data for the M35 series, Operator Level. the rest are here; TM's for the Deuce Since...

Have you downloaded the TM's yet ? TMs for M915 to M920 Series trucks Tm 9-2320-363-10 M915A1 M916A2 M916A2 M917A1 operators manual

Any way you look at Blazers are big heavy boat anchors , but they are also so prone to rust they lighten themselves over time

If your going to cut corners on the brake system because it looks like to much work for you , your probably better off selling it now .

I would say it is a commercial trailer rather than military , with as short as it is probably used with a very small paver or trenching machine . The problem with tilt bed trailers is getting enough weight to the front to get them latch , then moving it back to get tongue and axle weight right ...

Around here that would be on the high end of the price range if the it has a title and the brakes work .

Your not going to pull doubles with with bumper pull hitches , the lead trailer needs to be a 5th wheel ( this includes RV's ) You will need a RV double endorsement to pull a trailer behind a 5th wheel travel trailer. Whether or not you need a CDL or not depends on your intended use , if you...

Wehring brought a M923 from Hawaii to California but don't remember which port . Here is the thread ; Bought an M925 in HI... should be fun

nopics Somebody had to. :mrgreen:

This is a 10 year old thread they are most likely long gong . There is a "parts wanted' section in the classified that is free to use . that is he correct place for parts wanted instead of cross posting a bunch of old threads. Parts wanted Classifieds for...

The OP hasn't logged on to SS in over 4 years . Join Date 02-26-2012 Last Activity 06-09-2014 19:23

He should have the TM's , I gave him the link to the -10 and the rest of the deuce TM's at the end of last january. operators manual

Through the plug in the side of the case ,1/2 square drive.

The yellow card is for the coolant sensor.

Yuma, the great sand bowl of the west .

Yep , a GM 302 is the correct motor for your truck . Are you sure it is a REO motor and not a International "Red Diamond". REO had the Gold Comet motor they used.

They will remold pin holes and call it good , slap some uncured rubber in the hole and lay another layer on the outside then into the mold machine for new tread.

At least Faith Tire made it right with you , That's more than Faith can say about one of his suppliers.