Search results

Here's the last ones. There's 2 yards. This is one yard. The other across the street has about 15-20 vehicles, about 12 rail cars full of parts, and assorted piles of bigger parts grouped on the ground awaiting sale/disposal. There's still some cool stuff. Check out the 2 pipeline trucks and the...

2nd group:

Computers acting up, here's the first 4.

This is true. but; by the end of this coming summer-everything WILL be gone!:roll:

Digital died: so I only had the 35MM, Hopefully will have some tomorrow night.:roll:

Well MACCUS and I just got back from picking up his new M101A3 trailer in UT. We did a few side trips out and back. Boyce was first with an interesting stop. I only asked about M37 parts (they were down to 4 M37"s). Prices IMHO were very good. Got alot of bigger (but cheaper parts). I was quite...

Just got back from our little trip and now have mine installed (mostly). I also now have a spare one of the adapters!:jumpin:

Problem is I don't have a 9-8030 to see the pic. I've looked in the 4 other M37 manuals i've got and can't find a pic.

Does anyone have a pic of the receptacle actually mounted on the M37?

Coincincidently, I had heard about this very accident before even logging in on SS. (sorry no specifics on it)

Like Chevy's ex-CUCV???

Just get one of the mini tubing cutters from an auto parts store. Should be 3-4 dollars, and you can always use tools!:beer:

Along with all the gaskets in the fuel system!:beer:

FYI, The hood handles used in the MWO were 5 3/8" center to center not 4".

The rear lip of the hood sits on it when closed. Any of the big suppliers should have it.:beer:

http://www.steelsoldiers.com/deuce/62991-group-buy-deuce-rare-hood-handles-f-s.html Here was that post. They are completely different from the frame handles. The width of them is impossible to find unless you had them made. Might do another run in the spring.

Nope it's for the heater.

I have a heater intake that goes in the lower hole. It was from a 1986 A/F truck. It works much better than the upper hole due to not being attached to the side panel. Here is a pic of the field mod for the hood handles.

Memphis equipment or SECO in Augusta.

Antelope Valley has a pallet of NOS ones.