Search results

Yes plowboy that's what I'm referring to.

Having trouble finding this piece. Putting new axles under the m1009 and noticed the dust boot was torn up so I need a new one. Cannot for the life of me find one after searching for several days Here's hoping someone has a source

It's smaller fruitier foreign cousin will be attending however.

Looks like I am a solid maybe for this one

Complete with not very accurate tape measure

A forum member is doing the upgrade for me. I'll point him here

http://www.driveshaftspecialist.com/HTML%20Measure/UJ%20ID%20Guide.html a better site with u joint dimensions.

Found specs on a 3R joint. The caps are bigger than the 1350. That's a no go http://www.dennysdriveshaft.com/p501_3r_series_u_joint...neapco_performance_dynamics_greaseable.html 1330 looks to be what I need. Right cap size and about the right width too Maybe my axle has been messed with...

One more question that has come up. I need a conversion u-joint to mate the rear drive shaft and the pinion of the 14b. I had previously ordered a 1310-1350 conversion u-joint but the end-caps are too big for the 14b pinion. Looks like the info I was looking at was wrong. Is a 1310-1330...

Small update for everyone: If youre coming via Copper City rd, the street sign on top of the stop sign where you turn off Fort Irwin rd is gone, so the turn off is easy to miss. There is a big brown sign on Copper city maybe 100 feet from the intersection. Also that particular stop sign has...

Thats the plan. Will have a shop install the locker.

I guess i shoud've just made one consolidated thread, wasn't thinking ahead too much Swapping a 4.56 dana 60 into my m1009. I want 4.10 gearing with a locker. I know to buy the new gears but I am confused with the diff internals. I believe I need a series 3 carrier, however im not sure if it...

THAT is AWESOME. So happy I don't have to do any cutting/welding 14b is full float

Planning to do a 14b swap into a M1009. Have some questions. 14b came from a '84 suburban. Do i need to move the spring perches? 14b has an open diff with 4.10 gears. I would like to keep the gearing but install a locker. Would this be a compatible locker? I am unsure whether I would also need...

I have a few but currently working almost 72hrs straight soo... Later I'll post it

Appears to be this one: http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/Fuel-Filter-Base/_/R-FIL4913_0476037220 However this is the same thing as far as I can tell and it significantly cheaper: http://www.fleetfilter.com/filter/wix-filter-bases/24770.html

Just did this mod on my m1009. The pictures of what connectors to buy from home depot really helped. I needed also a couple hose splicers since my existing hoses didn't look very worn (and looked like a big job to replace) I deviated slightly on the mounting process: 3- 5/16"x 2.5" machine...

If I have time I'll make a sign and tie glow sticks to it. I missed the marker poles last time Too excited can't sleep:naner:

PM sent. we can make that work

For anyone around the downtown LA area, or close by. There is a gas station with diesel for $3.59/gal. But the station is cash only (no debit no credit just cash). 5007 Sunset Blvd, Los Angeles, CA 90027 Cheapest I've seen anywhere.