Search results

I picked up this m1087 with the intention of flipping it. The auction listing was terrible with one photo and no details, but I took a chance thinking I recognized the truck from its previous municipality that had it sitting out behind their highway department. I was right and lucked out. The...

Here is some information I’ve already obtained that I want to preserve in the post Sent from my iPhone using Tapatalk

I recently picked up a DUKW boat that was used by a tour company for a couple years. I’m not sure if this is classified as a DUKW boat a fake duck boat a tourist duck boat or what. it’s titled as a 1944 and it looks like it was converted into the tourist version in 2012 by a company called...

Engine won’t crank at all using S1. So no way to measure output. I did check that resistance was in spec. I found this in another thread and did check pins 1,3,5 on A-5 with S1 in start position. I have proper voltage at pin 1 but no voltage a 3,&5 with s1 in start. Sent from my iPhone...

That’s the schematic I used to determine that there should be voltage when cranking through 19 and 18 as that should be a closed circuit until the mag pick up registers the proper speed to shut off the starter. Sent from my iPhone using Tapatalk

Back again, I had to take a break from “5” because I’m not ready to pull the generator head off yet to check the windings. I was able to get”6” Running and producing power with no issues so far. This one is “7” just due to the number written on the side. This one was missing all the filters...

Looks like I need to go. Into the gen head with wires disconnected, nothing and lead looked clean all the way into head housing. I’ve never opened a gen head so I guess I have some reading to do. Sent from my iPhone using Tapatalk

I’m getting Mega ohm reading at the TB8 Good readings on the A1 1&3 wires all the way to TB8 Sent from my iPhone using Tapatalk

I’ll try to run all those down tomorrow. I also ordered a new set of leads for my multimeter. So that I can verify my equipment is working properly before I start basing my findings off of that. Sent from my iPhone using Tapatalk

So on the advice of Guy fang I decided to start a separate thread for my first generator that I’m going to troubleshoot the quotation marks show number five and that’s just because this is the number that this generator was tagged with on the side of it when I got it. Engin starts and runs It...

I picked up 3. Mep-804a generators for our camp, my buddies farm and my wife’s business. As someone who is generally terrified of going in my electrical panel troubleshooting these is definitely intimidating. I’ve got all the TMs download it and been going through then and a bunch of old...

Used the war rig to pick up a gift for my wife for being tolerant of my green iron addiction. I did have a white knuckle front tire blow out on the way That also activated the ejection seat for my drivers headlight somewhere on route 3 headed toward cape cod. I regret not having my air tools...

I wouldn't pay more than $1800 for one with a frame and cover with good tires. They seem to be very overpriced right now. I like them though, I put some smaller civilian tires to reduce the height and have mine setup to haul mountain bikes, paddle boards and kids kayaks.

Nothing to exotic. This is an M916 that went through the 2012 rebuild and got the Allison seven speed transmission behind the Cummins big cam III. I think the designation would be M916A0E1 I found a turret on eBay and decided to put a gun ring up above the winch in the back with a cradle that...

I’ll throw in my other truck “War Rig” this Month Sent from my iPhone using Tapatalk

Here is the original build thread M916 to MRAP / HET build thread https://r.tapatalk.com/shareLink/topic?share_fid=20191&share_tid=164241&url=https%3A%2F%2Fwww%2Esteelsoldiers%2Ecom%2Findex%2Ephp%3Fthreads%2FM916--to-MRAP---HET-build-thread%2E164241%2F&share_type=t&link_source=app Then the...

The Honey Badger started out as a m916 that I was going to crew cab with some HET style body lines and eventually morphed into an MRAP size school bus, then most recently I have been finishing the motor home conversion. With a bathroom, toilet, two l-shape dinettes that convert into beds, I have...

Any chance you know the part number for the shift controller? I can pull mine out in check if you don't.

I can only afford Charlize Theron from “monster” not from fury Road. Sent from my iPhone using Tapatalk

I was getting worried she was never going to make it to me. Sent from my iPhone using Tapatalk