Search results

Prospector, sadly the m1009 will not make it out this time around. It's at the hospital undergoing surgery to get stronger and taller legs.

I need constant adult supervision. So, its like I'm a kid :D

If anybody is coming from the West side of LA. In Pacific Palisades on Temescal cyn rd there are quite a few large (1-2ft wide, ~1ft tall) and some small pieces of wood. At least enough to fill 2 pick-up beds.

Most of the fuel filter bases will leak from the fuel pressure sensor area. But you don't need this sensor (its only used via the diagnostic port on measured the pressure to see if it is time to change the filter; I just change my filter every 10k miles). I used JB weld putty to block off the...

Just another pic of donut excitement!!!

What are you driving out there? So, we could keep an eye out for ya! I may have a couple of co-workers show up; one in a 4runner and another in an fj cruiser.

I use centramatics. They are like a spacer that go between your hubs and the wheel. They are expensive but they work and you'll never need to worry about balancing the tires. BB's would work but they are a mess when you are changing tires. Equal would work too but I wouldn't use since I'm...

I use a small portable speaker that I plug my I-pod into and I keep the speaker charged via a cigarette outlet. Mine is called "Jam" its a single speaker and it sits between the handles of the fire extinguisher and it gets plenty loud for driving at 55 with both windows down. I got it for $35...

I like to get off I-15N on Barstow rd and refuel at the valero right off that exit. Then take barstow rd north to main. Left turn onto main. Right onto 1st . Then take that over the train tracks and a left onto irwin rd. Take that until the turn left onto copper city rd (dirt road). Then use...

Here's a pic from one of the earlier rally's

I'd switch over the the AC 60g plugs. Get rid of the swellmans.

In! ETA: time to dust off my knee pads and get that weekend off.

20 gallons for the pickups 26 for the blazer

go for the 75/140. You'll be fine. I wouldn't worry about it too much.

At least with the tan paint (686?) It is a little bit smoother and harder than CARC. But it is the same exact color.

I was going to suggest; either crank them on tighter or lock tight them. Maybe a little bit of both, stick with blue lock tight.

When my u-joints went bad it sounded like a rock was stuck in the tire; a clicking noise that increased with speed.

If it's still there.... You could stop and turn the engine off when putting it into 4L. But 2H to 4H shouldn't grind.

The front tow mounts are plenty strong. Fastnova's 5 ton had to go into 6x6 to pull me out. http://www.steelsoldiers.com/showthread.php?132103-Azusa-Canyon-Sunday-11-23-14/page2 https://www.youtube.com/watch?v=gcD1tgOyPSY