Search results

The variable rates don't fit the older style lower control arms very well. So what are you trying to do? Are you looking for a softer ride? I assume wanting to go with M998 springs that's what you're going for. A M998 is a 7700lbs chassis your M1037 is a 8660lbs chassis. The higher the weight...

https://www.ebay.com/itm/M998-HUMMER-REAR-SPRING-SEAT-12338190-5589107-H1-HMMWV-AM-GENERAL/331728893990?hash=item4d3c953826:g:NK4AAOxyeglTZ23a&vxp=mtr Spring mounts are cheap. Doing thing half a$$ed would probably cost more than doing it right. Shocks and control arms should be the same.

https://www.steelsoldiers.com/showthread.php?158875-Putting-my-M998-back-to-a-M1025/page2&highlight= Post #19 I did the opposite of what you want to do. I took out the M998 springs and put heavier springs in. If you have the cast upper spring mounts you would have to change them to the stamped...

Your DRW axle might be a Dana 70 if it came from a DRW pick up. That's what I put in mine. http://www.billavista.com/Tech/Articles/14-Bolt_Bible/index.html

Pretty sure it's a sand shoe to replace the jack wheel.

You need a C pillar.

Think he's looking for the one's with the silver coating.

Getting closer.

Yeah I'm 6'2" and it to tall for me but I wanted a tall tire so I can go 60 at around 2400 rpm.

I agree with Recovery on the shackle flip. This truck really will never see off road. Unfortunately I will lose the locker for now. The 14 bolt locker wont work in the Dana 70. The SRW hubs on the DRW axle will make it 77" wide perfect for the Hmmwv wheels.

Spent the day swapping in a Dana 70 dually rear axle and a 4" lift. Still need to add the 14 bolt SRW rear hubs to the rear Dana 70 and add the dually hubs to the front Dana 60. I also need to install the crossover steering, steering box brace, braided brake lines and rear disc brakes.

They used a copy of that in the movie Fire Fox. https://en.wikipedia.org/wiki/Firefox_(film) The film was based on the creation of a "mythical" super fighter: the MiG-31 Firefox. The original Firefox from the novel was, cosmetically, nearly identical to the MiG-25.[4] The more intimidating...

Angle of the camera flash.

Got some more done on wheel well condensor.

Nice radio set up!

Working on installing wheel well A/C condensor.

https://www.steelsoldiers.com/showthread.php?158875-Putting-my-M998-back-to-a-M1025/page2 See pic in post #19

Looking good!

If you find a factory nut strip or make them grind the corners off and grind off any extra material to the nuts on both ends. Not much room to get these in and taking off that little bit really helps.

http://www.steelsoldiers.com/showthread.php?101001-M931a2/page4