Search results

years ago I installed a mk17a1 palfanger crane on a deuce chassis with a pto run hydraulic pump. It has served me well except for cold weather days when the oil is cold it will strip the teeth off the pto shaft in the transmission. The hydraulic pump probably pulls 50 hp. Yep you guessed...

wow my butt hurts looking at that! good luck

jimc is his user name.

13206E0813 is the unit and TM 5-6115-275-14 and TM 9-2805-259-14. I have the same prob myself. good luck

Dont forget on some models the solenoid on top of the fuel injector pump goes bad. It should have a knob that can be screwed in buy hand to hold open and then it will crank if that is bad. Try that it is a one minute job.

check to make sure there is not a cut off valve on the pressure side from the pump. Mine did the same thing ended up being a cut off with a square nob that i turned with a adjustable wrench and then got flow and everything worked fine. Mine was behind the manual valve handles in towards the...

you have rust or air in the system or both . rust will block the lines and air will act as a bladder. Use a power bleeder if that doesn't work replace the master cylinder. Good luck

turnerman landrum sc Alex

just tow it home it will cost you less. For someone to haul it will cost probably 1000 to take it to fl

I have a dual brake truck i will sell you and then you don't have to worry about the parts. I converted an older deuce with a c6500 truck with hydro boost. That was an ordeal.

wiki has some pics

i haven't heard how much you would charge to filter oil or cost of the unit?

no go unless he gets sc title in his name and signs over to you.

i have titled 6 trucks in SC and if the sf97 and the truck is not verified by a dmv agent (most of the time you have to take the truck to a dmv which = more cost assuming all vin numbers are correct) by the legal owner they will not issue a title in the owners name. The state wants their money...

89k 104000496 shaw sc 87k 104002352 wrafb ga For-sale

had the same problem it ended up being the compensation valve piston was to tight and not sealing. loosened it and until no threads showed on the shaft and then it worked great. if the spring is tight, bad, makes no sense to me but it worked. the tell tale sign is the air bleeds out the...

love mine. I wouldn't part with it for any amount of money!

pulls fine but to heavy to use behind the duece. i removed the crane for use on the deuce chasis and am planning a dump trailer with the bed of the mk17.

Turner still working on my m925 duece mud bogger. Landrum sc

hey exbrown i haven't been around but i have a ml17 and a a tow bar.