Search results

Hi the bunch of twin Diesel engines and transmission are they the boat/industrial twin packs? as these are different from the ww2 tank twin packs. if you could post pictures then I could identify them.

Hi I am quite familiar with the tank 6046 twin pack what would you like to know?

No phone number or address on the contact us section on there website,you just put your details in does not inspire confidence.

Pm repled to ��

Should have said why did it need to be reinforced ie was that point creasing with the occupants being with strained by the seat belts?

Why was the triangle section needed for the seat belt upgrade as the retraction unit does not attach to the body that low on B pillar?

Hi do not know if it was me you contacted but I did reply to some one via a pm on this site asking for a copy. i asked for there address that I could send the 14 page operator maintenance pages that I got sent directly from hdt when they were still around did not get any reply to the address...

Hi if you still want the brackets you can have them free just pay for the shipping. can bring them over to thee USA so shipping would be USA only.

Yes a m274 mule will fit between the rear Humvee fenders as I put one in a humveee m998 a few years ago and shipped it to the uk. i had a full length soft top on it with tail gate up you could drive it still but not to comfortable it only had to be driven on to a slide bed and off and on to...

Hi tried the link on this thread to the classified add but link does not work so has anyone got a working one with both leads and manual for sale? shipping will be to Mississippi or will be doing road trip Chicago to Baton Rouge mi,then to Houston so could pick up along this route. thanks Mark.

Hi thanks for the replies I now know what they are for and how it looks with them being used in service.

Hi will check if there is holes on the inside of tailgate. The rear brackets hardly stick out from body you would only gain about a couple of inches by having tail gate down does not seem worth it?

Hi, Does anyone recognise these tan brackets fitted to my Humvee? What there purpose would be? Also, why the triangular reinforcement riveted into the rocket panel - was this done because they were cracking? Thanks Mark

Hi do the 2 cylinder m274 mule engines have a engine number? if so where is it?and what is a typical engine number? so I can recognise it when I find it. thanks mark

I don't know if I missed something but as far as I read he said camera and monitor are 24 volt?

Hi did you duel fuel line the engine first then the fuel button or did you do them at the same time? if done separately how did each mod manifest its self as far as driving it? asking as plan to do both to a vt8-460 m51 Super Sherman engine. thank mark

Hi, After all all of these posts I am now brain washed into wanting one (it's like an advert, if you see it often enough you want one!) who has them them for the best price in the US or as you guys in the US say, who has the best deal? thanks Mark

Hi have been looking at past posts for the duel line Cummins pt pump mod (to feed fuel flow to each end of the engine heads equally)and the what seems to be referred to commonly as button mod (pt pump manual calls ideal-speed plunger). was thinking why not adjust the plunger in the throttle...

The switch I fitted to the older box was to the side facing the reinforcement ribbing of the body so had to know where it was to reach it under the dash also when I left it had a battery terminal isolator. rather then do away with the eess I was thinking if you can do away with the circuit bord...

Hi I was thinking the same thing did a search if any one had put a solenoid in the EEss box with a sprung switch through the side but could not find anything. i did it with a couple of the older boxes that had the solenoids in and they have been fault lesss for ten years now.