Search results

Hi not armor but a shipping price if interested ww2 jeep from Quebec or Montreal Canada to the uk is £2750/$3630 usd.

My bad should be dual !

Think as a daily driver I would want duel circuit brakes.

Should name and shame if seller has done you wrong.

The 6-71 detroits in the m10 6046 twin pack,the supercharger always made positive pressure from 0.3 psi at 400 rpm to 8 psi at 2100 measured when I dynoed them.

Hi I had a us supplied hydromatic rebuild kit I got for a m24 Chaffee but a few gaskets did not fit same shape different hole spacing. ended up getting several cutting molds made i.e. Valve cover,drive output housing

Hi thought I would tag on my question to this post. the anti sagging plates that go between the bows, the fastener that holds them down is it a self tapping screw or threaded? as mine a m1102 appears to have a thread in the bows,also what head is the fasteners i.e. Hex,slotted. thanks mark

Hello, Can anyone recommend a person or company that can move six Humvees in September 2017 from Magnolia TX to Houston TX 77013 (50 miles each way)? The vehicles run... Thanks, Mark

I put my diesel m1 up for sale a few years ago for $19k but did not sell might count against me it being in the uk.

Reminds me I was in the us a few years back going down some interstate from Atlanta to Florida in my rental 4x4 and come up on a 3axle motor home towing his military Humvee looked over and he looked all content with the world gave him the thumbs up.

Hi the m1030b1 that I got from the us military ran but lacked power at 70 plus mph found valve timing out a couple of teeth and cam to cam buckets clearance to small on two valves so got shims surface ground to bring gaps back to tolerance and this was straight out the us military so worth...

Hi there is quite a lot to get to convert it to gfd the fan is different need new chassis crossmembers,different mounts for the front diff,new mount for the radiator,GDF,drive shaft,engine crankshaft pulley,radiator cowling and re route some small pipe work.A fair job

Hi used with the gear driven fan (GDF) serial number 300k and above in theory.they do away with the hydraulic clutch and have the GDF do you want to sell one?

Hi Malcom very interesting and informative will be mirroring what you have done ��

Hi just to let you know Justin no longer works for rounders logistic his company direct number in the thread is now answered by a Tod so dealing with him will let you know if still good service like every one appears to of had with Justin.

Hi are you looking for a company in the us? Or a company in Europe to do this? If uk ���� then I know a company I would recomend and have used and I could also assist if needed.

Hi watched the torsion video but in the video he says nothing about applying a brake to make it lock up? How come on the humvee you have to apply the brakes to lock up? I know this works as l have had my humvee in low lock and had two wheels spinning one on the frount corner and one on the...

Hi have you checked the hub fluid levels? as I have had a engine lift pump fail,that leaked diesel into the vented pipe system on a usmc humvee that caused several seals to leak at once.

I was thinking more m41 walker bulldog just see the horizontal locker with handle behind hatch. m24 has no vision periscope in the hull in frount of drivers hatch in hull least m 24 Chaffee does not ��

I did a internet search when I read it in supply line and came up with the same its a one off but the Write up said early models had the v8-92ta and the later models m1070e1 the series 60 implying it is a in service model. so the Write up is wrong and misleading!