Search results

Got my Humvee today at Dix--perfect weather--did not know if it would fit on my flatbed--Ron from GP said he saw no problem and forked it on----Got everything home with no problems--Felt like Christmas the whole way home--got home and drained 10 gallons of water from the fuel tank--will try to...

Have an 8.3 cummins with a miss in the third cylinder--no blow by--seems like the injector nozzle may be bad--any ideas on cleaning it up--How difficult is it to remove and replace--video of smoke rings below--thanks George https://youtu.be/wkjD9Mr1GrA...

I need a M923a1 rubber fuel line with fittings for between the injection pump and the canister filter--are there fittings I can buy and use 1/2 inch or 3/8 inch rubber fuel line--thanks George-------250 cummins

What engine oil weight does the trans use and how many quarts does each hash mark equal----this trans uses motor oil--thanks George

When I placed the winch levers in operational positions the hyd oil flowed and the winch would not move in either direction--The inside of the winch looks clean with nothing broken--the spool does move with the lock pin pulled but the main gears will not turn--any ideas--thanks George

Told GP the paper work including the form sf97 does not work in my state when they have their name as the buyer--I was told by their title dept in San Francisco that I must have misunderstood the verbiage--I asked the women to read the verbiage to me--She could not find it--It felt like I was...

My m923a1 transfer case is stuck in neutral--bought the truck not running--put in a starter--fuel lines--batteries--pcb--and lots more--It may have sat for 4 years with transfer case in neutral--trans works and that shaft moves--I disconnected the linkage which is frozen and tried tapping the...

I have an 8.3 in a m923a2--I took it out today for the first time since I got it--oil level was good with clean oil--had to add 1 gallon antifreeze--everything looked good--after 2 hour 45mph ride there was alot of blow-by at the slobber tube and the oil dip stick--also had a nice oil drip out...

I have 2 M923a2s that have sat since March and now the brakes are locked and the system does not seem to get air pressure-- both trucks operated ok when parked--The air gauges both reach 100lbs plus--the low air buzzer is sounding and the brakes remain locked up--The hand brake does not...

When I operate the washer control and push it in all the way the top on the reservoir blows off--getting to much air pressure into the bottle-if I press it in 1/8 of an inch it works ok--is the control valve on the dash adjustable or is mine bad--thanks George

Looking for trucking of a M38a1 from Iowa to NJ-----anyone use a shipper out that way--thanks George--732-581-9058

Is the m936a2 wrecker transfercase interchangeable with the m923a1 transfercase

Need trucking of M923 from Jackson NJ to Hartford CT--Landoll--drop deck--rpg--aprox 175 miles--Thanks George--732-581-9058

Got a M923a2 recently and the side mirrors were in the bed--did not think much about it until I went to put them back on---The heads on the pins <bolts> were wrenched off and the pins are frozen in the door hinges--tried oil--heat--hammer--------anyone have any luck getting the pins out--Thanks...

A friend of mine wants to run a M923a2 with a big plow blade and large salt spreader--He says fully loaded the truck would weight 50000 lbs--Would the axles and tires handle this weight--what is the max load for the front axle----I know the gov only rates this truck at a gvw of 31550lbs--

need trucking for m35a2 from jackson nj 08527 to syracuse ny area---approx 340miles-thanks george--732-581-9058

Just purchased a m923 --the front axle has a very loud noise in forwards and back--axle has oil in it and no leaks--in the video you can hear the noise--any ideas--thanks------------------------------ http://youtu.be/BxrF00N_wtk

what do the 3 smaller wires on the batteries go to---one is a ground--one is 12 volt--one is 24 volt--thanks

BOUGHT SOME M923s--- IT WAS A BIG SURPRISE TO SEE THE REAR OF ONE ON THE TOP OF A STEP DECK TRAILER WITH NO RAMP GOING TO IT---i ASKED THE DRIVER HOW HE GOT IT THERE AND HE SAID SOMETHING LIKE --IT CLIMBED UP THERE --I AM NOT SURE HOW HE DID IT BUT i AM GLAD I WAS NOT THERE TO SEE IT----CLICK ON...

My trans oil level is at the bottom of the stick at idle --i can not find 10 weight oil----can i use 10-30 to top it off or what do you suggest--thanks