Search results

Humvees in the boneyard----Reminds me of all the m151s---They go in in 1 piece and come out in many

Great pictures of some trucks--shows some beat up and some not to beat up--Thought everyone would like it---

GOT A M923 FROM MEADE LAST WEEK--I DID NOT SEE IT IN PERSON--THE PICTURES LOOKED GOOD BUT I WANT TO HAVE IT TRUCKED--HAS ANYONE USED A TRUCKER THEY WOULD RECOMMEND-- --THE TRIP IS FROM FORT MEADE TO JACKSON NJ--180 MILES--THANKS GEORGE--- http://www.govliquidation.com/auction/view?auctionId=5914487

I would like to charge my trucks through the battery slave plug---I have a few trucks and it would be easy to hook up to the slave and keep the batteries up with a trickle charger---anyone know where I can get the 24 volt charger--Thanks

Got three 900 series trucks from GL last week--They were $4500 each which seemed cheap--I used my friend Phil to move them since I am not that brave anymore to jump in and drive--Phil had to work hard as it was hot that day and we took 2 of the trucks on one trip--Just as we left the yard the...

HOW DO i REMOVE THE ROTOR FROM THE E-BRAKE SET UP ON THE DRIVESHAFT---THE ROTOR IS WARPED----ARE THE PADS SUPPOSED TO FLOAT ON THE 2 PINS--THANKS GEORGE

Is there a crossover number for the 4 belts on early m998---the belts I have on the alternator are tight but are jumping---I would like to try gates or napa--do not know why the belts jump so much other then they are old--thanks George

Hi--I need the wiring diagram of the start switch and the starter for the 1986 m998----have been having glow plug prolems and just realized the last owner put in a key switch with a wire going from the switch to the starter selonid--of the 3 wires going tho the start two of them are spliced...

m998--I was driving my newly purchased 1986 m998 around my back yard--It has 26k miles --I was moving at aprox 10 mph in drive and the t case was in high----after going through a 1.5 foot deep depression with the drivers side front tire a very loud popping and grinding sound could be heard --the...

Need humvee shipping from Max Meadows VA to jackson NJ--Any members have shippers they can recomend--Thanks George

If anyone can help--I purchased this m151a2 from my friend Don and I have no idea what year it is--the title and vin plate are incorrect---there is a plate wielded to the body above the fuel lines under the trans cover on the drivers side--the number is------C151-29729----any ideas of the...

I purchased 2 a3s--one has a green cat engine and one has a yellow cat--any reason for this--thanks

Just received the 2 m35a3 trucks out of maryland--i never owned one of these before and they are great--my frieend phil delivered the trucks for me--they both start and both transmissions work--they shift around 2600rpm--the truck almost has to be wide open for them to shift--the larger tires...

I have a shipper that will be picking up trucks from today's auction in Anneville Pa and delivering to NJ when the releases are done--aprox. $350 PER TRUCK TO YOUR HOUSE--Any NJ buyers need shipping call me--732-581-9058--- George

A town in nj recently had 3 hmmwvs up for sale--an ambulance, 2 door and a 4 door--i bid up to $13600 on each--the ambulance had 800 miles and the other 2 had under 3000 miles--the 2 door was driven into a lake by some very smart person to see what would happen and waisted the motor--the...

Does any one have an idea where i can purchase an m35a2 pto shaft and the flange that bolts to the pto--someone must have borrowed the one off the deuce i just purchased --thanks george

Just picked up a deuce in nj at mcguire afb in 4* weather--it took 2 hours to get on the base--we had to wait for an escort who turned out to be sitting across from us in a crowded waiting room--i called him on his cell phone to see where he was and heard a phone ring--it was him---he asked...

which fitting on the m151a2 fuel tank is the fuel line--this is the emmissions type tank--I want to use this tank in my m151a1--thanks

I pulled the hubs to clean them up and greese them--should the nuts be torqued --thanks george

I bought the intake and exaust gasket kit that came with the metal exaust gaskets--Have any of you tried the new kit?--Does it work--my m151a1 has had a bad exaust leak for many years--thanks