Search results

Air pressure switch is getting ready to DOA on you !!!

I got mine from Red Barn Customs . Great to deal with $35.00 for 2 arms .

Rural Truck Parts in Sparta ,Ky. Terry Curry 859-823-2931 Has many of the 6 lug 22.5 wheels . The 22.5 wheels are much truer that the 20" rivited wheels with safety ring .Tires can be purchased at any truck recycle or repair shop cheap. Radial design tires that are tubeless if you pickup...

I would love to catch someone !!!! I need to resharpen my skills with my M40 . Usually makes for a bad day when they get about 600 yards away and the back glass or tire blows out !!! I will give anyone in need what I have but have no patience for stealing !!!

I don't think pine will hold up to the weight of snow on the cover . Better to use clear white oak . I have a few used corners if U can't find enough to get you by. The wood needs to be 7/8 X 2 7/8 . Strange size was going to make mine from tubing , but could not find the correct size , must...

Hey !!! Great looking build !!!!

The one I used was from an F350, but can not be sure of year . Drilled 3 holes per side and bolted on !!!! The one I found was a class % for $35.00. They are out there for the picking !!

I used white clear white oak from a lumber yard . You Tube has a few how tos on steam bending wood . This worked easy . Total cost was about $60.00 for all uprights and bows .

I have burning used transformer oil for years now great stuff !!!! Acts like it has a hotter BTU that diesel . Burned all the paint off the stack !!! Can not tell any diference in power or starting , etc. Be safe :driver:

**** !!! I hate when that happens !!!! That left a mark in the check book !!!

I used an off the shelf hose from an F350 but did not wright down the year or engine size. Had to trim about 1 inch off the ends( 2 inches total ). Has worked fine not hitting anything . I think there were hose numbers on the cross reference on this sight . Good luck , I will try to locate part...

Had an old Harley Hummer 2 stroke that would run backwards on demand !!!! Ran good just a little rough to control on a high speed pass !!!

Try engauging the transfer case front axle drive . Mine makes alot of noise until I engauge the transfer case then very QUIET . Removed the front drive section of the transfer case everything was new and clearences were great !!! Put it back together same noise . The old saying goes "if it ain't...

I would like to. Just depending on work schedule.

Welcome from the great state of Ky also !!!

Welcome !!! Great to see more in KY !!!

Suonds like U have the hoses fiqured out !!! I had to retighten my hose clamps after a few times of heating and cooling down .

I have used Dyna Mat it is good !!! But a bit pricey

Bad or dirty Connection of ground .

I ran 10w syn. for awhile when it got COLD no power steering until fluid warmed up!!! No fun !!!!ATF works great !!!