Search results

I have located at Ky. Fluid / Air Products in Florence, Ky. Just to lazy to replace with it working !!!! They have or can get all the fittings needed at reasonable rate.

I have been running air brake tubing for years. It works fine .( It is not see through ) I had a terrible time finding male tubing nuts . Found steel replacements but no brass does anyone have any brass fittings they would be willing to part with ? Thanks and have a great and safe day,Dave 8-)

Mine was stuck and very stubborn to turn also. Removed and cleaned it with KROIL , works slick and easy now .

I had to add another ground wire from the sending unit to the frame ground. Now works fine!!

Gimb, is correct the intake is cooled by coolant water , no baffles in tubro.

I used the Garrison G21 type of control valve and fabed a new steering arm on the axle . Found mine on an old fire truck. Early ('68-72) Chevrolet and GMC 40-60 series had the same assist steering system also. Thousands of soft drink delivery trucks in salvage yards. Google -Rural Truck Parts...

Slim to none . I have hydro assist steering, and radial tires drives great after changing the shims. Well worth the effort. I spoke with an old time truck mechanic about the o caster . He explained to me that it is set up this way to ease the return to straight for off road driving. To keep...

The best way to describe 0 degree caster on the road would be like riding your bike as a kid with the front fork turned backwards. Not too much Fun!!! To flip the caster shims : 1st off the shim is what is between the front springs and the axle. If you look close you can see that they look like...

The biggest thing to help steering on the road is to flip caster shims on front axle. You ill not believe the handling difference that this makes.Have a great and safe day,Dave 2cents

must use hydro or air power or have a handle 3 ft long to have enough leverage

I have replaced with zippered 2x !!! From diffrent suppliers JUNK!!!! I found 2 NOS US Government zipper boots will give them a try. My suggestion would be one piece .

Invest in a geared lug wrench money well spent !!!!! Just think if you were on the road and this happened !!!!

used RTV silicone on mine . seals great But hard to remove

22.5 wheels are out there . The ones on mine look the same as 20's. You can get 22.5 tires at any truck repair shop. I run 11R/22.5 radial waste hauler tread . They work great tubeless tires also.

M35a2 Power Steering . I may have some pictures if I can still find them . I posted pictures on here when I was fabing and installing it. Try some power steering searchs. Almost works too good !!! Pm me with qyestions I will try to help install . Thousands of them out there " early pop...

Try Kroil allow it to set for a few days

They move about in turns . They will make you have that brown greasey discharge the first time you here it and see the after effects !!! Just normal movement

This the style that I used on my conversion. It has a control valve/draglink assembly that replaces your draglink. I used a 5ton multi pump. Garrison steering control valve/draglink, 5ton steering ram(cylinder) attached to the tie rod. Works great , didn't have to remove stock steering box. If...

Shelter Halves great seat covers !!!

I hope to be there this year also !!! Just depends on work schedule . Only have 4 more winters to go !!! :-)