Search results

Would it be safe to say that the trans fiuld would be 15-40w. Seeing how 3 types have been mentioned in past post.

Checks in the mail

Only heard good things about the new location for the rally - rain or shine.

I was messing with mine today first trying the check valve below the glad hand - didnt work still leaks just as DSD277 mentioned - DSD277 is the check valve that caused the problem on your truck is located under the dash?

Coffey1 - I was hoping that might be the problem - I will try that first

Its leaking from the one marked "emergency" and red in color.

Mine has been running all the time too - have too looks for leaks.

Thought I would consult the vast knowledge base here.....Heres the problem - when the air brakes are released air leaks from the emergency gladhand in the front of the truck. is this normal for that to be charged with air? If not then what would likely cause this?

Thanks everyone for the info - tomorrow I will be visiting the tire shop down from my shop.

Just bought 4 new tires for the Mule now I need to install them - Can it be done by hand? Suggestions on tools?

The cover slides into a recess in the back - thats what mine does anyway.

1981 712

1981 712

Dave, Glad to hear it all worked out in the end - the Mk48 sure came in handy - Sounds like you might need another with a fifth wheel/60,000 lb winch :-D. Walter -

55 to 58 thats it with mine.

Looks like I found a source local for the o rings :-) Now a 3/4 drive impact driver will need to be bought

Clarke Once the wheel is split using a couple pry bars/lube you removed the wheel from the rim? I didn't think that was possible by hand. We will have to give it a try for sure. Thanks for the detailed info. Walter

Any suggestions on who carries these O-rings - for the M1078 wheel with 5/8 studs

Didn't know where to ask this question but here goes - Have (2) 395/85-20 Goodyear tires mounted on CTIS wheels - Both leak at the point where the air line passes through the split rim. Another member here suggested splitting the rim cleaning and lubing the o-ring with silicone lub and...

Thanks everyone